AspenTech Launches Applications For Heat Exchanger Design, Rating, And Simulation

Versatile new tools incorporate industry-leading technologies from Aspen HTFS(TM) and Aspen B-JAC(TM), and deliver optimized designs, reduced operating costs and significant capital savings

CAMBRIDGE, Mass.—(BUSINESS WIRE)—Jan. 24, 2006— Aspen Technology, Inc. (Nasdaq: AZPN) today announced the availability of its new generation of applications for the design, rating and simulation of heat exchangers. Aspen Tasc+(TM), for shell & tube heat exchangers, and Aspen Acol+(TM), for air-cooled heat exchangers, combine the best of the industry-leading technologies from Aspen HTFS and Aspen B-JAC, and represent a major step forward for thermal and process engineers.

The new applications provide engineers with versatile tools for optimizing heat exchanger design and simulating their performance. Sophisticated optimization logic enables the user to select the optimum design for the specified process conditions, resulting in typical savings of 10--30 percent on the capital cost per heat exchanger. The applications can also be integrated with the Aspen Plus(R) and Aspen HYSYS(R) process simulation tools, allowing evaluation of heat exchanger performance as part of an overall plant or process. This approach can deliver optimized operations with higher productivity and lower operating costs, in addition to significant capital savings at the design phase for new and upgraded processes.

"These new generation applications are built on AspenTech's strong heritage in heat exchanger design and simulation, including the exceptional knowledge generated by the Aspen HTFS Research Network(TM)," said Blair Wheeler, Senior Vice President, AspenTech. "We firmly believe that Aspen Tasc+ and Aspen Acol+ will set the standard for ease of use and will enable true concurrent engineering. Their comprehensive interfaces to Aspen Plus(R), Aspen HYSYS(R) and Aspen Teams(R) facilitate efficient collaboration between the key engineering disciplines involved in front-end and detailed engineering of the process plant."

Aspen Tasc+ for shell & tube heat exchangers

Aspen Tasc+ provides a comprehensive tool for the thermal design, rating and simulation of shell & tube heat exchangers. The new application integrates the best features from AspenTech's previous offerings for shell & tube heat exchangers, Aspen Hetran(R) and Aspen TASC(TM), and is designed for service across the process industries including oil & gas, chemicals and power. A bi-directional interface with Aspen Teams(R) enables users to perform the complete mechanical design for all shell & tube types.

Key product features include:

-- New powerful design optimization capabilities

-- High-level run-time interfaces with Aspen Plus and Aspen HYSYS

-- Aspen Properties(R), Aspen COMThermo(R) and Aspen B-JAC property databases

-- Interfaced to Koch Heat Transfer (formerly Brown Fintube) Twisted Tube Exchanger modeling

-- Improved low-fin methods

-- Extended vibration analysis including HTFS and TEMA methods.

Aspen Acol+ for air-cooled heat exchangers

Aspen Acol+ uses the best features of Aspen ACOL(TM) and Aspen Aerotran(TM) to provide a complete application for the thermal design, rating and simulation of air-cooled and other cross-flow heat exchangers. This versatile tool can be applied in a wide variety of process industries as well as by engineering contractors and equipment fabricators. The application can handle a broad range of exchanger services, from multi-component condensing to boiling heat recovery and de-humidifying.

Key product features include:

-- New powerful design optimization capabilities

-- High-level run-time interfaces with Aspen Plus and Aspen HYSYS

-- Aspen Properties, Aspen COMThermo and Aspen B-JAC property databases

-- Reflux condensation passes (A-frame modeling)

-- Performance evaluation from fan curve specification

-- Improved fin-tube methods from Aspen HTFS+ Research.

Aspen Tasc+ and Aspen Acol+ are introduced as part of aspenONE(TM) 2004 Update 2 and are now available.

About AspenTech

Aspen Technology, Inc. provides industry-leading software and professional services that help process companies improve efficiency and profitability by enabling them to model, manage and control their operations. AspenTech's integrated aspenONE(TM) solutions are aligned with the key industry business processes, providing manufacturers the capabilities they need to optimize operational performance, make real-time decisions and synchronize the plant and supply chain. Over 1,500 leading companies already rely on AspenTech's software, including Bayer, BASF, BP, Chevron Corporation, DuPont, ExxonMobil, Fluor, GlaxoSmithKline, Sanofi-Aventis, Shell, and Total. For more information, visit www.aspentech.com.

This press release may contain forward-looking statements for purposes of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Actual results may vary significantly from AspenTech's expectations based on a number of risks and uncertainties, including, without limitation: AspenTech's plan to improve operational performance may not be implemented effectively; AspenTech has identified material weaknesses in its internal controls with respect to software license revenue recognition and other matters, that, if not remedied effectively, could result in material misstatements; risks around securities litigation and investigations; AspenTech's lengthy sales cycle makes it difficult to predict quarterly operating results; fluctuations in AspenTech's quarterly operating results; AspenTech's dependence on customers in the cyclical chemicals, petrochemicals and petroleum industries; the possibility of new accounting standards or the interpretation of existing accounting standards affecting our financial results; AspenTech's ability to raise additional capital as required; intense competition; AspenTech's need to develop and market products successfully; reliance on relationships with strategic partners; challenges associated with international operations; and other risk factors described from time to time in AspenTech's periodic reports filed with the Securities and Exchange Commission. AspenTech cannot guarantee any future results, levels of activity, performance, or achievements. AspenTech expressly disclaims any current intention to update forward-looking statements after the date of this press release.

AspenTech, aspenONE, Aspen HTFS, Aspen B-JAC, Aspen Tasc+, Aspen Acol+, Aspen Plus, Aspen HYSYS, Aspen HTFS Research Network, Aspen Teams, Aspen Hetran, Aspen TASC, Aspen Properties, Aspen COMThermo, Aspen ACOL, Aspen Aerotran and the aspen leaf logo are trademarks of Aspen Technology, Inc., Cambridge, Mass.



Contact:
Aspen Technology, Inc.
For Media:
Marie Telepneff, 617-949-1324

Email Contact
or
For Investors:
AspenTech Investor Relations
617-949-1624 or 888-996-7080

Rating:
Reviews:
Review Article
  • October 09, 2008
    Reviewed by 'SATAI'
    I am working on Tasc+ Version 2006. I ma extensively using this tool for more than 13 months.
    It's a very nice user friendly tool.
    I have some querries about Tasc+ , can I ask ?
    Please revert ASAP.
    Best regards
    Sunil

      3 of 3 found this review helpful.
      Was this review helpful to you?   (Report this review as inappropriate)


For more discussions, follow this link …
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise