Theorem's Translators Parallel CATIA V5 Development

PRESS INFORMATION


Release date: 7th December 2005




THEOREM’S LATEST TRANSLATORS MATCH CATIA V5 DEVELOPMENT



CAD data exchange specialist Theorem Solutions continues to match latest market requirements with the upgrading of its CADverter product suite to provide bi-directional translation between CATIA V5’s newly-introduced Revision 16 and other leading CAD and visualisation systems.



Available immediately, the new versions of Theorem’s CADverter offer fast and accurate translation of CAD data between CATIA V5 R16 and Unigraphics NX2 and NX3; I-DEAS 10, 11 and 12; Pro/Engineer; Parasolid; CADDS 5 and 4X; ICEM; as well as ProductView and JT visualisation formats.



Theorem's commitment to keep pace with the latest releases of all leading CAD systems is based on its use of application development utilities provided and supported by the design systems vendors themselves. This not only ensures parallel development of new CADverter products, but also close compatibility with fast-evolving and increasingly capable CAD systems, in this case CATIA V5 R16.



The latest CADverter products will be freely available to existing Theorem customers with a current maintenance agreement, as well as to all new customers. They will also be made available to other Theorem users by special agreement.



Announcing the new series of CADverters for CATIA V5 R16, Theorem's General Manager, Keith Jeacock said: "We are delighted to be shipping these translators to our customers so soon after the release of the new revision of CATIA. Our extensive pre-release testing confirms that migration to the latest CADverters will be accomplished by users very easily."



For further information please visit:

http://www.theoremsolutions.com/pr/pr52.htm



For image please visit:

http://www.theoremsolutions.com/pr/pr52_large.jpg



About Theorem Solutions

Theorem Solutions is recognised as one of the world’s leaders in CAD/CAM product data exchange, offering application programs for Direct Database conversion and for International Standards-based conversion methods (STEP). The Theorem CADverter family is the widest range of direct CAD translators available from any single source. In addition to CADverter, it includes CADviewer, Data eXchange Navigator (DXN) and CADhealer, all delivering improved communications and interoperability between CAD systems. Theorem’s on-line translation service is at www.cadverter.com and information on all its products and services can be found at www.TheoremSolutions.com.



-ENDS-



Editor’s note:

For further information please call John Wedrychowski at Theorem Solutions Ltd

on: +44 (0)1543 444455 (email: Email Contact),

or see Theorem Solutions’ Website: www.TheoremSolutions.com.

Editorial contact: Rob Bloom at PR Plus Ltd on: +44 (0)24 76 590721;

or e-mail: Email Contact.



Issued on behalf of Theorem Solutions:



Theorem Solutions Ltd Theorem Solutions Inc.
Tame House 6279 Tri-Ridge Boulevard
Wellington Crescent Suite 220
Fradley Park Loveland,
Staffordshire Ohio 45140,
WS13 8RX England USA
Tel: +44 (0) 1543 444455 Tel: +1 513 576 1100
Fax: +44 (0) 1543 444454 Fax: +1 513 576 1110

Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise