Electrode Design with TopSolid’Electrode 2006



Intelligent machining of electrodes and molds with TopSolid’Cam
TopSolid'Electrode is a fully integrated TopSolid module for the design of electrodes. It allows designers quickly create electrodes and manages all stages of the electrode design from the sheet creation to electrode diving direction and dimensioning. Spark gaps can be modified by the operator. Once the electrode has been created TopSolid'Electrode manages height adjustment, base rotation, insertion of mandrels, etc.

TopSolid'Electrode assures the following functions:
  • Automatic creation of electrode geometry
  • Prolongation of drafts if required
  • Offsets for electrical discharge gaps
  • Reliable collision detection thanks to a stable environment
  • Direct link to manufacturing
  • Rapid creation of precise drawings for the shop floor
  • Transfer of measurements to be verified
  • Productivity gains of around 30%
TopSolid'Electrode 2006 will be launched at the beginning of the new year. With significant improvements such as electrode strategy including electrode choice and strategy implementation, automatic and intelligent recognition by TopSolid'Cam of the gap values applied to the electrode, etc. be sure not to miss TopSolid'Electrode 2006

Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise