Quick Start With PLM-easy

Dr. Fritz Faulhaber GmbH & Co. KG in Schoenaich selects PLM-easy PDM/PLM Solution from BCT Technology.

Willstaett (Germany). After an extensive benchmark, Dr. Fritz Faulhaber GmbH & Co. KG in Schoenaich (Germany) selected the complete suite of PLM-easy tools, and implementation services from BCT. In addition to a benchmark, the benefits of the PDM/PLM project were quantified through a formal investigation. The partnership proved to be an excellent choice for Faulhaber due to the winning combination of technical competence, and the value-added capabilities of the software products developed by BCT. The project included Teamcenter Engineering with BCT's ME10-Manager module (migration from ME10-data to Teamcenter Engineering), EasyPlot (plot management software integrated with Teamcenter Engineering), aClass (classification software for standard parts and features), and Inspector (automated collection of drawing characteristics and the generation of critical dimension lists for QC planning), as well as the integration with SAP via ERP Connect. ERP Connect is a new product from BCT that allows bi-directional data exchange of parts lists and part status between Teamcenter Engineering and Faulhaber's existing SAP ERP system.

About Dr. Fritz Faulhaber GmbH & Co. KG
Dr. Fritz Faulhaber GmbH & Co. KG located in Schoenaich (Germany) has over 500 employees, and manfactures drives systems used in medical & laboratory technology, technical instruments, general industry, and office automation, and aerospace.

About BCT Technology AG
BCT Technology was founded in 1991 specializing in software solutions and consulting services to optimize product development. BCT develops software tools that assist in standardization and optimization of both products and the product development processes. Tools are based on the 3D CAD Technology from UGS including NX and Teamcenter.


For more information please contact
Bob Mann
Office: 603 352 9699
Mobile: 508 292 0906
mailto: Email Contact
http://www.bct-technology.com/english

Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise