Delphi Shows Off Expanded Engine Management Line

Line-up led by Reman ECMs and DSD online subscription-based services

TROY, Mich., Oct. 25 /PRNewswire/ -- Delphi Corp. plans to introduce a new line of engine management parts and a new subscription-based service product at 2005 Automotive Aftermarket Parts Expo (AAPEX) show, Nov. 1-4 in Las Vegas.

(Logo: )

Visitors to booth 1638 at this year's AAPEX show will have the opportunity to view Delphi's new line of remanufactured engine control modules (ECMs) and powertrain control modules (PCMs), intake manifolds, and expanded line of ignition wire sets. The new Delphi ignition wire set packaging will be featured in this year's New Product Packaging Showcase at AAPEX, displayed on the upper level at the Sands Convention Center.

In addition to these new offerings, Delphi will display its complete line of OE quality replacement parts for engine management, fuel management and heating and cooling systems. Delphi's vehicle electronic products are designed for a precise fit, every time.

"The rise in electronic content in vehicles is rapidly changing the parts and service requirements for our business," said Francisco A. (Frank) Ordonez, president, Delphi Product & Service Solutions and vice president, Delphi Corporation. "Delphi has the inside track on these changes and is investing to help its customers turn these challenges into opportunities."

As a company that can supply virtually every major OE vehicle system, complemented by a strong portfolio of aftermarket products and services, Delphi is well positioned to help the independent aftermarket develop a variety of new opportunities.

Delphi is introducing a new Driver Seat Diagnostic (DSD) On-Line subscription-based service product and new merchandising system. Delphi service experts will be available for "live" demonstrations at the Delphi booth each day throughout the show. Delphi is also introducing additional training and technical support enhancements, including the new hands-on workshop seminars.

Finally, again this year, Delphi NASCAR Driver Kyle Busch will be in the Delphi booth signing autographs on Tuesday, Nov. 1 from 10:30 to 11:30 a.m. and Wednesday, Nov. 2 from 10:30 to 11:30 a.m. and 1:30 to 2:30 p.m.

Visit Delphi at AAPEX this year in Booth 1638. For more information about Delphi products and services, please visit .


This press release as well as other statements made by Delphi may contain forward-looking statements within the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1995 that reflect, when made, the Company's current views with respect to current events and financial performance. Such forward-looking statements are and will be, as the case may be, subject to many risks, uncertainties and factors relating to the Company's operations and business environment which may cause the actual results of the Company to be materially different from any future results, express or implied, by such forward-looking statements. Factors that could cause actual results to differ materially from these forward-looking statements include, but are not limited to, the following: the ability of the Company to continue as a going concern; the ability of the Company to operate pursuant to the terms of the DIP facility; the Company's ability to obtain court approval with respect to motions in the chapter 11 proceeding prosecuted by it from time to time; the ability of the Company to develop, prosecute, confirm and consummate one or more plans of reorganization with respect to the chapter 11 cases; risks associated with third parties seeking and obtaining court approval to terminate or shorten the exclusivity period for the Company to propose and confirm one or more plans of reorganization, for the appointment of a chapter 11 trustee or to convert the cases to chapter 7 cases; the ability of the Company to obtain and maintain normal terms with vendors and service providers; the Company's ability to maintain contracts that are critical to its operations; the potential adverse impact of the chapter 11 cases on the Company's liquidity or results of operations; the ability of the Company to fund and execute its business plan; the ability of the Company to attract, motivate and/or retain key executives and associates; and the ability of the Company to attract and retain customers. Other risk factors are listed from time to time in the Company's SEC reports, including, but not limited to the annual report on Form 10-K for the year ended December 31, 2005 and its most recent quarterly report on Form 10-Q and current reports on Form 8-K. Delphi disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

Similarly, these and other factors, including the terms of any reorganization plan ultimately confirmed, can affect the value of the Company's various pre-petition liabilities, common stock and/or other equity securities. No assurance can be given as to what values, if any, will be ascribed in the bankruptcy proceedings to each of these constituencies. Accordingly, the Company urges that the appropriate caution be exercised with respect to existing and future investments in any of these liabilities and/or securities.

CONTACT: Laura M. Joseph of Delphi Corporation, +1-248-267-8643,
Email Contact

Web site:

Review Article Be the first to review this article

Autodesk - DelCAM

Featured Video
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Lead Geospatial Analyst for Alion at McLean, VA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise