Battelle Develops New Weld Fatigue Prediction Technology

Battelle’s revolutionary, mesh-insensitive structural stress method, trademarked VerityTM, will be available worldwide as a result of an agreement reached with Safe Technology Ltd.

A Battelle researcher in the US has developed a ground-breaking method for predicting fatigue life in welded structures that could revolutionise the field and has the potential to save billions of dollars in the aerospace, automotive, bridge construction, shipbuilding, pipeline, and off-shore oil rig industries. Battelle’s ground-breaking technology, trademarked VerityTM, will soon be available worldwide as a result of an agreement reached with UK company, Safe Technology Ltd.

Modeling and testing regulations vary from industry to industry, but it’s safe to say billions of dollars are spent every year on testing, modeling, and predicting the fatigue life of welded structures. Pingsha Dong, technical director of the Center for Welded Structures Research at Battelle, has developed a method that can eliminate the need for expensive testing and over-engineering that is done to compensate for uncertainties (the ‘fudge factor’) in current fatigue design practices in various industries.

“For the past 25 years, experts in the field have been trying to address the inadequacies in stress analysis for fatigue design of welded structures so that companies would not have to compensate for poorly correlated test data,” says Pingsha. “Eventually, the industry and academia gave up. We did not.”

“This is a robust, consistent methodology. No matter who uses it, you get the same answer. No matter what load you apply and no matter what geometry you have, the mesh-insensitive model gives you a very accurate way of determining the fatigue life of a weld”, said Ford’s Senior Technical Specialist Dr. Hari Agrawal, a well-known fatigue design expert in the automotive industry.

Verity™ will be included as a module within the Safe Technology product marketed as fe-safe™. The worldwide distribution agreement between Battelle and Safe Technology marks the first widespread commercial introduction of Battelle’s patented Verity™ methodology, which predicts the fatigue life of welded structures with unprecedented accuracy.

“We are thrilled to team with Safe Technology in making Verity™ available to users around the world,” said Battelle’s Pingsha Dong who developed Verity™. Industry experts estimate that the demonstrated effectiveness of Verity ™ should save hundreds of millions – if not billions – of dollars in engineering, testing, and manufacturing costs.

The fe-safe™ suite of durability analysis software has become the tool of choice selected by leading companies worldwide for the analysis of machined, forged and cast components in steel, aluminum and cast iron, and for complex assemblies, high-temperature components, welded fabrications and stamped components.

“The Verity ™ method offers major advantages in terms of accuracy and ease of use” said John Draper, Safe Technology’s CEO. “Until now, Verity™ has only been available through specific arrangements between Battelle and its clients. We are delighted to be working with Battelle to make it available worldwide in a user-friendly format. The Verity ™ software will be released in fe-safe™ in February”.

In the US, Verity™ was used to win a recent Society of Automotive Engineers (SAE) fatigue design and evaluation committee Weld Challenge against some of the top minds in fatigue life prediction. Recently, one major automotive company began using the method for full-vehicle durability prediction and has seen considerable savings in new-vehicle development cost. Recognizing the enormous impact of Verity™ tools in the automotive industry, SAE International awarded Pingsha and his team the prestigious Henry Ford II Distinguished Award for Excellence in Automotive Engineering.

Safe Technology are offering training sessions by Pingsha Dong: “Verity™ Mesh-Insensitive Structural Stress Method for Fatigue Evaluation of Welded Structures”, Ottawa Lake, Michigan Nov 7th & San Antonio, Texas, Nov 15th.
For a full list of events and training courses, please visit and contact Email Contact for further information.

Battelle is a global leader in science and technology. Headquartered in Columbus, Ohio, it develops and commercializes technology and manages laboratories for customers. Battelle, with the national labs that it manages or co-manages, oversees 19,000 staff members and conducts $2.9 billion in annual research and development. Battelle innovations include the development of the office copier machine (Xerox), pioneering work on compact disc technology, medical technology advancements, and fiber optic technologies.

Safe Technology is a technical leader in the design and development of durability analysis software. Based in Sheffield, UK, the company is privately owned and is unique in its dedication to the field of fatigue and durability analysis software. Working with worldwide partners and distributors, Safe Technology develops and sells the
fe-safeWorks™ suite of software which incorporates fe-safe™ as well as specialist add on modules covering thermo-mechanical fatigue, creep fatigue and the analysis of rotating components.

For more information, please visit , or


Review Article Be the first to review this article

Featured Video
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
System Designer/Engineer for Bluewater at Southfield, Michigan
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
4th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2018) at Movenpick Hotel Amsterdam City Centre Amsterdam Netherlands - Sep 19 - 21, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise