The MathWorks To Deliver Technical Presentations At 2005 American Institute Of Aeronautics And Astronautics Forum

—(BUSINESS WIRE)—— The MathWorks
Who:        The MathWorks, the world's leading developer of software
            for technical computing and Model-Based Design for
            engineers and scientists in industry, government, and

What:       The MathWorks engineering experts to deliver technical
            presentations and exhibit industry leading software tools
            for aerospace engineering applications at the AIAA
            Guidance, Navigation, and Control Conference; AIAA
            Modeling and Simulation Technologies Conference; and AIAA
            Atmospheric Flight Mechanics Conference.

Where/When: The conferences are scheduled to be held at the
            Hyatt Regency San Francisco at Embarcadero Center in San
            Francisco, California from August 15 to 18, 2005.

The American Institute of Aeronautics and Astronautics (AIAA) jointly held Guidance, Navigation, and Control; Modeling and Simulation Technologies; and Atmospheric Flight Mechanics Conferences and Exhibits provide a forum for the aerospace industry's most prominent scientists and engineers to gather and discuss the latest technology advancements for designing, developing, testing, constructing, and operating air and space vehicles and systems.

As part of this year's event, The MathWorks will deliver the following four technical presentations at the Modeling and Simulation Technologies Conference:

-- Monday, August 15 at 9:30 am PDT, Dr. Pieter J. Mosterman will present a paper titled, "Requirements Based Testing in Aircraft Control Design."

In Session 16-MST-2, Simulation Requirements, Standards and Reuse I, Pieter will discuss the use of Commercial Off-the-Shelf (COTS) Software with Model-Based Design to develop a fault detection, isolation, and recovery (FDIR) application for a redundant actuator control system.

-- Monday, August 15 at 10:30 am PDT, Paul Barnard will discuss "Software Development Principles Applied to Graphical Model Development."

Paul's presentation will also be part of Session 16-MST-2 Simulation Requirements, Standards and Reuse I. He will detail the use of software tools for creating high-fidelity simulations that can deliver simulation results quickly and efficiently. Specifically, Paul will highlight the ways in Model-Based Design has delivered process improvements for both flight simulation development, as well as for embedded software development.

-- Tuesday, August 16 at 4:00 pm PDT, Tom Erkkinen will deliver a presentation titled "Model Style Guidelines for Flight Code Generation."

In Session 73-MST-13 Simulation Requirements, Standards and Reuse II, Tom will describe model style guidelines and best practices for the automatic generation of flight code that is optimized for efficiency, traceability, and clarity. Although the focus is on flight code generation, developers using Model-Based Design with automatic code generation for other applications such as real-time simulation, rapid prototyping, and hardware-in-the-loop testing will benefit from the guidelines provided.

-- Wednesday, August 17 at 9:30 am PDT, Terry Denery will deliver the presentation "Multi-Domain Modeling of the Dynamics of a Hovercraft for Controller Development."

As part of Session 88-MST-14, Engineering Simulators Uses and Techniques III, Terry will discuss the modeling and simulation of a hovercraft vehicle for the purposes of developing a vehicular motion control system. To illustrate, a multi-domain modeling approach is applied through the use of The MathWorks product Simulink, and includes the full powertrain system, a rack-and-pinion steering system, ground effects and electric power generation.

To learn more about how The MathWorks products are accelerating the productivity and creativity of aerospace engineers, visit them in Booth #12 for a complete overview of their tools, as well as product demonstrations.

About The MathWorks

The MathWorks is the world's leading developer of technical computing software for engineers and scientists in industry, government, and education. With an extensive product set based on MATLAB(R) and Simulink(R), The MathWorks provides software and services to solve challenging problems and accelerate innovation in automotive, aerospace, communications, financial services, biotechnology, electronics, instrumentation, process, and other industries.

The MathWorks was founded in 1984 and employs more than 1,000 people worldwide, with headquarters in Natick, Massachusetts. For additional information, visit

MATLAB, Simulink, Stateflow, Handle Graphics, Real-Time Workshop, and xPC TargetBox are registered trademarks of The MathWorks, Inc. Other product or brand names are trademarks or registered trademarks of their respective holders.

The MathWorks, Inc.
Dave Smith, 508-647-7427

Email Contact
SHIFT Communications
Kara Armit, 617-681-1232

Email Contact


Review Article Be the first to review this article
Featured Video
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
System Designer/Engineer for Bluewater at Southfield, Michigan
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Upcoming Events
Montréal Manufacturing Technology Show (MMTS) 2018 at Place Bonaventure Montréal Canada - May 14 - 16, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise