Module Works Press Release - ModuleWorks release 2016.08 CAD/CAM components



Sep 9, 2016 -- ModuleWorks, the leading supplier of CAD/CAM components for toolpath generation and simulation, has announced the latest release of its CAM components, ModuleWorks 2016.08, the second major update of 2016. Each ModuleWorks release contains many new and enhanced features across the product range. This latest version includes new features for 5-Axis, 3-Axis and Simulation.

ModuleWorks is at the forefront of 5-Axis machining and simulation technology, providing the toolpath and simulation technology that powers many of the leading CAM systems available around the world today.

Highlights of the new release are shown below:


5-Axis Machining

The new automatic clearance feature allows the system to automatically determine the type, position and dimension of the clearance area. An intelligent algorithm maintains the most suitable setting for each pattern. Automatic clearance can be used for port, multi-blade, multi-axis and rotary machining for cylinders planes and spheres, and for all surface-based, drilling and SWARF machining patterns.


Automatic clearance area

Multi-axis roughing now supports rotational or so called “periodic pocket” geometries, where the tool does not follow the pocket continuously, but ensures an overlap by returning to the seam after each rotation.

The tool axis control functionality has been extended to enable the generation of 4-Axis output only. It can be used with 4-Axis machines that do not have a tilting head but only a trunnion table.

3-Axis Machining


 Multiple stock to leave finishing cycles

The new “multiple stock to leave” feature enables users to define uniform or independent stock to leave values for each machining surface.

The new 3D trimmer significantly improves the quality of rest finishing toolpaths and the accuracy of the steep shallow boundary calculation.

The Silhouette containment option has been extended to support Pencil & Project curves. This option is for limiting the machining area within the silhouette boundary of the machining surfaces.





Volume based chunk removal

The new Remove Chips option automatically removes all small chips from the display area during the simulation run, which improves visualization and eliminates the need to manually remove the chips.

All pop-up notifications have been improved and now have different options for disabling their display during simulation runs. For example, users can disable pop-ups for all similar events in the simulation or for a specific pair in the simulation.

Machine Simulator displays a new pop-up message when a stop command is encountered during the simulation. This allows users to disable further stop command pop-ups according to criteria (for all stop commands and conditions, for similar events in the operation, for similar events in the simulation).

During mouse rotation in Machine Simulation, a dot is displayed to show end-users the selected rotation center point.

For Mill-Turn machines and Cut-Off / Pick-Off simulations, Machine Simulator now supports a new technology based on the real physical process. Clamping occurs directly on the existing stock, and by releasing it, the stock can be dropped.

A new algorithm for 5-Axis machining improves the quality of tangential SWARF cuts by producing a higher precision on the tip of the tool or along the entire tool length.

Find out more in our videos on our What’s New YouTube playlist.

About ModuleWorks

ModuleWorks is a software component provider for the CAD/CAM industry. ModuleWorks’ expertise in toolpath creation and simulation is recognized throughout the CAM industry and its software components and development services are used by the majority of the leading CAM vendors for sophisticated industry focused solutions across diverse business sectors. ModuleWorks 5-Axis and Simulation software has been used in the manufacture of complex parts for over a decade and they have many users across the global CAD/CAM industry.


Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise