Heller to show 5-axis machining options at IMTS 2016

Aug 26, 2016 -- Heller Machine Tools will exhibit several options for productive 5-axis machining in Booth S-9174, IMTS 2016, Chicago. Heller’s 5-axis milling is centered on productivity and process dependability with a goal of establishing new standards in terms of universality, flexibility and absolute precision, according to a spokesman. With its C head, available in several machine models, a fifth axis provided by the tool forms the basis for achieving maximum process dependability.

HELLER demonstrates that system availability way above 90 percent is feasible without restrictions in terms of chip removal rate – no restrictions with Heller’s Power Cutting Universal swivel head unit. This machining unit, providing 44kW power and 242Nm torque, counts among the most powerful 5-axis spindles with HSK63 spindle taper on the market.

Also, the power provided is available at any spatial angle. As a result, the Heller machining centers  are capable of heavy-duty cutting, combined milling and drilling operations or 5-sided machining in a single setup. Even in 5-axis simultaneous milling the machine fulfils highest requirements in terms of dimensional and contouring accuracy as well as economic efficiency.

Temperature curves of a 5-axis machine inevitably vary throughout a day of production. However, due to the precise construction and thermal stability of the Heller machine, they have no influence whatsoever on its precision. This level of precision down to the µ range is provided by absolute encoded, direct measuring systems, high-resolution rotary encoders and YRT bearings with integrated measuring system. HELLER also combines this high level of precision with the required dynamics with proven 5-axis kinematics provided by the tool in X, Y, C and/or A axis and two axes provided by the workpiece in Z and B.

Editorial contact:
Dave Arnesen
Email Contact   
Tel   1-810-229-2299

Contacts:
HELLER Machine Tools
1225 Equity Drive, Troy, MI 48084
www.heller-us.com          
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise