3D Systems’ End-to-End Manufacturing Solutions Help Mold-Makers Achieve Unprecedented Productivity and Savings

  • Bastech combines Cimatron software, Direct Metal Printing (DMP) and Geomagic Control to deliver complex conformal cooling channels in advanced mold-making applications
  • 3D Systems and Bastech to host webinar sharing best practices for efficient and economical conformal cooling design and production

ROCK HILL, S.C., June 14, 2016 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today that Bastech, a partner and one-source solution provider for additive manufacturing services and equipment, used 3D Systems’ end-to-end 3D solutions to introduce a new level of simplicity, efficiency and economy to its conformal cooling mold-making process. By combining the tailored mold design toolsets of Cimatron™ with the flexibility of the ProX® DMP 200 for producing complex metal geometries and Geomagic® Control™ for quality inspection, Bastech was able to reduce design time by 70%, cycle time by 14% and overall costs by 16%. In the manufacturing industry where success is a delicate balance of efficiency, cost and quality, these benefits give Bastech a clear competitive advantage.

3D Systems helps reduce design time, cycle time and costs in injection molding.jpg
  Combining Cimatron™ software, Direct Metal Printing on the ProX® DMP 200, and Geomagic® Control™ into a single end-to-end workflow enabled Bastech to substantially reduce design time, cycle time and overall costs for injection-molded parts.


Conformal cooling channels created with Cimatron.png
  Complex conformal cooling channels created with the comprehensive mold design toolsets of Cimatron™ led to a 14% reduction in cycle time and 16% reduction in overall costs.


Mold core insert prototyped with SLA and printed with DMP.jpg
  A Bastech mold core insert with conformal cooling channels prototyped using 3D Systems’ Stereolithography (SLA) technology and printed in maraging steel on the ProX® DMP 200.


Photos accompanying this announcement are available at

http://www.globenewswire.com/NewsRoom/AttachmentNg/435a7f30-5a1d-4438-82e3-6bcab1b5e94e

http://www.globenewswire.com/NewsRoom/AttachmentNg/c3216dc5-e60c-43fa-b9d6-4ff92a8b2b23

http://www.globenewswire.com/NewsRoom/AttachmentNg/a0f28cc2-991c-4e4c-90c2-47f53df99cc7

Watch this video showcasing the many ways Bastech is using 3D Systems’ software and 3D printing solutions to improve its design and manufacturing process.

For over two decades, Bastech has used additive manufacturing technology to solve a wide range of applications, from functional prototypes for the automotive industry to complex investment casting patterns for end-use aerospace components. Well versed in traditional as well as additive methods, Bastech recently performed two benchmark tests for manufacturing molds with conformal cooling channels – one using 3D Systems’ end-to-end solutions, and one using conventional processes. The Ohio-based firm found that using 3D Systems’ Cimatron mold-making software, the ProX DMP 200 3D printer and Geomagic Control led to a quantifiably more productive, affordable and streamlined manufacturing process.

Together with 3D printing on the ProX DMP 200 and quality inspection via Geomagic Control, Cimatron design and analysis saved the firm more than 40 hours of programming and shop time compared with traditional methods, amounting to valuable savings for the firm. More importantly, the effectiveness of the conformal cooling mold that Bastech produced led to a more efficient production run, boosting company productivity even further.

"The bottom line is that by working with Cimatron, Direct Metal Printing and Geomagic Control, we are designing faster and making more efficient molds more economically,” said Ben Staub, President and Owner, Bastech. “3D Systems’ end-to-end solutions take our business to the next level by saving our designers and engineers time and energy in developing and executing complex designs.”

“Combining our advanced technologies allows our customers to achieve better and more innovative outcomes,” said David Lindemann, Applications Engineer, 3D Systems. “End-to-end digital workflows are transforming the field of manufacturing.”

3D Systems will host a design and manufacturing webinar with Bastech on June 16th to share findings from Bastech’s benchmark testing and talk about best practices in conformal cooling. During this hour long webinar, Bastech president and owner Ben Staub and Bastech engineering manager Scott Young will discuss how 3D Systems’ end-to-end solutions can lead to greater efficiency and reduced costs.

The webinar will take place on June 16, 2016, at 11 AM EDT. Pre-registration is required.

To learn more about Bastech, please visit www.bastech.com

About 3D Systems

3D Systems provides comprehensive 3D products and services, including 3D printers, print materials, on-demand manufacturing services and digital design tools. Its ecosystem supports advanced applications from the product design shop to the factory floor to the operating room. 3D Systems’ precision healthcare capabilities include simulation, Virtual Surgical Planning, and printing of medical and dental devices as well as patient-specific surgical instruments. As the originator of 3D printing and a shaper of future 3D solutions, 3D Systems has spent its 30 year history enabling professionals and companies to optimize their designs, transform their workflows, bring innovative products to market and drive new business models.

More information on the company is available at  www.3dsystems.com

Investor Contact:
Stacey Witten
Email: 
Email Contact

Media Contact:
Timothy Miller
Email: 
Email Contact

Primary Logo




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise