Mentor Introduces Multi-Discipline Systems Engineering Tools For Cost & Weight Optimization in Automotive and Aerospace Markets

TOKYO, Dec. 4, 2015 — (PRNewswire) —  IESF Conference, Mentor Graphics Corporation (NASDAQ: MENT) today announced the availability of new tools delivering integrated electrical/electronic/software systems engineering capability for the transportation market.  The new Capital Systems™ tools allow implementations to be optimized for key parameters such as cost and weight.   Unlike other approaches, engineers within the various disciplines do not need to understand one another's detailed syntax.  This makes the new tools easy to deploy, leaving staff free to concentrate on design innovation. 

New tools from Mentor Graphics delivering integrated electrical/electronic/software systems engineering capability for the transportation market.

Transportation platforms such as automobiles and aircraft are largely defined by their electrical/electronic systems, including embedded software.  But implementation decisions, such as choosing the best processing resource for a software component, are hard to optimize because cross-discipline impacts are difficult to assess.  For example, re-locating a software component may affect not only processor characteristics but also databus communications and wiring implementations.  Given the scale of electrical/electronic content in modern vehicles, poor decisions can have significant impacts. 

The problem can be solved by focusing on vehicle functions that will later be implemented as software, hardware, data communications, or electrical interconnect, and then assessing the impact of alternative implementations.  The Capital Systems tools support functional connectivity capture, platform-level integration of those functions, and instant measurement of consequential impacts.  Together they provide a complete environment to guide engineers to optimum decisions.

Luciano Lavagno, Professor of Electronics at Politechnico di Torino (Polytechnic University of Turin), who has a special research interest in hardware/software co-design, commented, "These tools are unique because they capture all high-level functionality aspects at a single abstraction level.  This information is projected onto a representation of the host platform, which could be a car, an aircraft, or indeed a distributed system-of-systems.  Real-time metrics immediately show engineers the effect of their decisions, allowing rapid optimization.  No complex internal data mappings are needed, so the tools are ideal for fast adoption by staff responsible for system implementation decisions."

In practice new designs almost always build on data derived from previous projects.  Moreover, the data describing implementation architectures must flow directly to detailed design processes within the various disciplines.  For this reason the Capital Systems products provide extensive data connectivity.  Martin O'Brien, general manager of Mentor's Integrated Electrical Systems Division, said, "These tools are seamlessly integrated with Mentor's Capital electrical and Volcano network/embedded software design flows.  They also support data exchange with other vendors' tools, including adjacencies such as SysML systems modeling and 3D mechanical modeling."

The Capital Systems tools are part of the successful Capital® suite, an advanced software suite for the electrical systems and wire harness domain.  Used by leading automotive and aerospace OEMs and suppliers worldwide, the Capital tool is built to support the complex demands of integrated processes from initial product definition through electrical system design, harness manufacture and vehicle maintenance.

About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months in excess of $1.24 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

Mentor Graphics, Mentor, and Capital are registered trademarks and Capital Systems, Volcano, and VSA are trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.

For more information, please contact:  
James Price
Mentor Graphics
503.685.1778
Email Contact

Mentor Graphics logo.

Photo - http://photos.prnewswire.com/prnh/20151130/291989-INFO
Logo - http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/mentor-introduces-multi-discipline-systems-engineering-tools-for-cost--weight-optimization-in-automotive-and-aerospace-markets-300186745.html

SOURCE Mentor Graphics Corporation

Contact:
Mentor Graphics Corporation
Web: https://www.mentor.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise