Delcam to show 2016 FeatureCAM and PowerMILL CAM software at SEMA

Oct 13, 2015 -- Delcam will demonstrate the 2016 releases of Delcam’s FeatureCAM feature-based programming system and its PowerMILL CAM system for high-speed and five-axis machining at the SEMA Show to be held in Las Vegas from 3rd to6th November.  SEMA is the premier automotive speciality products trade event in the world, with many exhibitors and visitors that use Delcam’s software for the manufacture of aftermarket automotive parts.

Companies already using Delcam software to program their machines include Local Motors, Willis Machine, Loveridge Machine and Hogan’s Racing Manifolds.

Of particular interest to an industry that is focused on speed will be the enhancements in FeatureCAM 2016 to the Vortex high-efficiency area-clearance strategy.  Vortex gives the fastest safe metal removal from solid carbide tooling, in particular designs that give deeper cuts by using the full flute length as the cutting surface.  It produces toolpaths with a controlled engagement angle and so maintains the optimum cutting conditions for the complete roughing cycle, giving faster machining and longer tool life.

The ability has now been added to adjust and fine tune the non-cutting moves of 2.5D and 3D Vortex toolpaths, with options to retract the tool and/or to increase the feedrate.  These options can be set individually, or can be combined to achieve an optimum toolpath, with a reduced cycle time.

Other enhancements in the 2016 release include support for bar-fed mills, more efficient turning, and user-interface improvements to make programming even easier and faster, in particular when using multiple set-ups.

The main enhancement in PowerMILL 2016 is the ability to mirror complete machining projects in one operation and to maintain automatically the machining characteristics, for example to specify automatically whether climb or conventional milling should be used in each section of the toolpath.  Previously, only individual toolpaths could be mirrored.

Automatic mirroring saves considerable time whenever right- and left-hand versions are needed of a part or tool.  It will also be faster to program the machining of symmetrical objects since it will be possible to program one half and then mirror the toolpaths to complete the program.

Simulation in PowerMILL has been improved with ability to simulate complex tool changes, an auto-translucency option that will allow viewing of the table attach point at all times, and the ability to draw translucently the safe areas for rapid moves.


Figure 1 - Machining a manifold at FeatureCAM customer Willis Machine

Contacts:

Peter Dickin
Marketing Manager
Direct phone: 44 (0)121 683 1081                 
e-mail: Email Contact

Delcam Ltd                                                 
Small Heath Business Park,                               
Birmingham, B10 0HJ, UK
www.delcam.com      

 




Review Article Be the first to review this article
Rand3D

Jobs
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
SolidCAM: SolidCAM Dec 2017 Campaign Save 28 percent



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise