MOST® Cooperation Specifies CI+ Content Protected Transmission over MOST

Karlsruhe (Germany) October 6, 2015 – The MOST® Cooperation – the standardization organization for the leading automotive multimedia network Media Oriented Systems Transport (MOST) – has released its latest MOST Stream Transmission Specification that includes support for the MOST CI+ Interim License Agreement issued by the CI Plus LLP ( www.ci-plus.com). CI+ now allows a MOST network to transport CI+ protected content using Digital Transmission Content Protection (DTCP).

"We are happy to work together with the MOST Cooperation to enable the adoption of CI+ in the dynamic automotive world," said Laurent Molac, Spokesman of CI Plus LLP, Guildford, UK. CI+ is a technical specification that adds additional security and features to the proven DVB Common Interface Standard. CI+ compatible consumer electronic devices, such as Integrated Digital Televisions and Set Top Boxes, can access a wide range of Pay TV Services via plug-in CI+ Modules wherever the CI+ Technology is supported by the local Pay TV Provider.

"This agreement with the CI Plus LLP enables the transmission of the latest digital video broadcasts to be transported between vehicle components over the widely used MOST network," said Henry Muyshondt, Administrator of the MOST Cooperation. "MOST Technology has been at the forefront of supporting digital content protection since it became the first high speed network to be able to transport DVD content back in 2003."

The MOST Cooperation has optimized the MOST network for high quality video streaming. MOST150 enables direct isochronous transport of, for example, MPEG video streams without bit-stuffing or transcoding. In addition to the approved content protection schemes for Digital Transmission Content Protection (DTCP) and HDCP, MOST allows to transport CI+ protected content.

Images Preview:  http://www.ahlendorf-news.com/en/news/most-cooperation-20151006-ci-plus-dtcp/

Image 1: MOST® Cooperation Specifies CI+ Content Protected Transmission over MOST
Copyright:  www.mostcooperation.com
Download:  http://www.ahlendorf-news.com/media/news/images/MOSTCO-Stream-Transmission-CI-Plus-H.jpg

Image 2: Henry Muyshondt is the Administrator of the MOST Cooperation.
Copyright:  www.mostcooperation.com
Download:  http://www.ahlendorf-news.com/media/news/images/MOSTCO-Henry-Muyshondt-H.jpg

About MOST Technology

MOST (Media Oriented Systems Transport) is a multimedia networking technology optimized for use in cars and other applications. It enables the transport of high Quality of Service audio and video together with packet data and real-time control over a single transmission medium. MOST can use plastic optical fibers (POF), coax based electrical physical layer, and shielded and unshielded twisted pair (STP/UTP) copper wires that meet automotive environmental requirements. Today, over 180 car models use MOST as the communication backbone for their information and entertainment equipment.

About MOST Cooperation

The MOST Cooperation (MOSTCO) is the organization through which MOST Technology is standardized and refined so that it continues to stay abreast of the latest industry requirements. It consists of international carmakers and key component suppliers. They have joined together to work with the MOST Technology and to contribute to its innovation. The MOST Cooperation is prepared to embrace efforts to develop and standardize the technology for other industries and to establish the corresponding work structures. The MOST Cooperation was founded in 1998 to standardize MOST Technology as a global standard for multimedia networking. Audi, BMW, Daimler, HARMAN and Microchip Technology are its core partners and constitute its Steering Committee. For more information see  http://www.mostcooperation.com.


Contacts:

Mandy Ahlendorf
ahlendorf communication
+49 8151 9739098
MOSTCO_PR@ mostcooperation.com

MOST Cooperation
Emmy-Noether-Strasse 14
76131 Karlsruhe, Germany
contact@ mostcooperation.com
http://www.mostcooperation.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise