Russia’s Leader in Nuclear Power Licenses C3D Kernel

ROSATOM Enhances Simulation Software with Geometric Technology from C3D Labs

Moscow, Russia: June 16, 2015 — C3D Labs is pleased to announce that ROSATOM, the Russian Federal Nuclear Center’s All-Russian Research Institute of Experimental Physics (VNIIEF) has licensed the C3D kernel for use in its 3D software.

After a selection procedure that thoroughly tested the contenders amongst available kernels, engineers at VNIIEF decided in favor of the C3D geometric kernel from C3D Labs. The technology will be used by the research institute to develop their own software that computes simulations of a variety of physical processes.

“We look forward to using the C3D geometric kernel to build computational meshes for 3D models, and for simplifying, adjusting, and improving the computational geometry,” said Valery Budnikov, department head at VNIIEF.  “Our collaboration has proven to be productive for both teams.”

During the testing phase, C3D Labs engineers joined forces with those from VNIIEF, so much so that C3D Labs decided to release the support systems and development environments requested by the research institute, even before they had licensed the C3D kernel. By using the C3D kernel, VNIIEF is able to seamlessly integrate two Russian design systems, ASCON's COMPAS-3D CAD (see ascon.net/solutions/kompas_3d) and the LOGOS software suite (see www.vniief.ru/wps/wcm/connect/vniief/siteeng/missionareas/Research). LOGOS was created at VNIIEF for computing simulations with supercomputers.

"The R&D team in Sarov works in very interesting fields of science – that's why we are proud and happy to collaborate with them and ROSATOM,” said Nikolay Golovanov, C3D Development Manager. “We were very impressed with the high level of professional skills displayed by VNIIEF developers, and their knowledge of geometric modeling.”

“C3D Labs operates in a sophisticated market, with the end users being engineering software developers,” said Vasily Sizov, Senior Project Manager at the IT Cluster of the Skolkovo Foundation. “They successfully challenge competitors that sometimes are subsidiaries of much larger corporations, like Siemens PLM Software and Dassault Systemes.”

The Skolkovo representative noted that the C3D kernel has great opportunities in the market, expressing confidence that the collaboration between C3D Labs and VNIIEF will help both: on the one hand making the kernel better, while providing enhanced computational simulations at the nuclear power research center.

About C3D Labs

C3D Labs specializes in the technology-intensive market of CAD components. The company develops and markets the C3D geometric modeling kernel, which is used by developers of CAD systems and educational institutions. In 2013, C3D Labs became a resident of Skolkovo, Russia's state development office park (see sk.ru/foundation/itc/).

For more information, see c3dlabs.com/en/products/c3d-kernel

About  VNIIEF

The Russian Federal Nuclear Center’s All-Russian Research Institute of Experimental Physics (VNIIEF) is a part of ROSATOM, Russia’s state atomic energy corporation. VNIIEF is a large research and development institution that focuses on scientific and national economic problems, and consists of a complex of closely interrelated institutes:

  • Institute of Theoretical and Computational Physics
  • Institute of Experimental Gas Dynamics and Detonation Physics
  • Institute of Nuclear and Radiation Physics
  • Institute of Laser Physics

With its high-level scientific and technical capabilities, VNIIEF has been able to expand the scope of its research and development to effectively explore new areas in high technology, attain world-class scientific results, and carry out unique, fundamental, applied studies.

The ROSATOM website is at www.rosatom.ru/en

For more information on VNIIEF, see www.vniief.ru/wps/wcm/connect/vniief/siteeng


Contacts: 

C3D Labs 
Office 112, Beta Business-Centre
1 Altufevskoye Shosse
Moscow 127106, RussiaE-mail:
Phone: +7 (495) 783-2560, ext. 2130 
info@c3dlabs.com 

VNIIEF 
Department for Business Communications 
10 Muzrukov Ave, Sarov
Nizhni Novgorod Region 607188, Russia 
E-mail: osv@dc.vniief.ru 
Phone: +7 (831) 302-4802




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise