Linde industrial gas technologies help steelmakers improve operational efficiencies and profitability

Visit Linde at AISTech 2015, May 4-7, Booth 2831

MURRAY HILL and NEW PROVIDENCE, N.J., April 29, 2015 — (PRNewswire) —  Experts in steel metallurgy and process gas engineering from Linde LLC and Linde Engineering North America Inc. (Blue Bell, PA) will showcase technologies for improving plant productivity, product quality and environmental performance at AISTech 2015 at the Cleveland Convention Center, May 4-7.

www.lindeus.com

At booth #2831, Linde will feature process solutions for REBOX® pre-heating which increases throughput while reducing emissions – OXYGON® ladle pre-heating for equipment use optimization and performance maximization, and REBOX® DFI (direct flame impingement) for rapid surface preparation – as well as HYDROPRIME® and ADSOSS® technologies for hydrogen and atmospheric gas generating to address large demand requirements. In the AIST technical sessions, experts will present overviews of two advanced systems for on-site production of hydrogen and oxygen process gases – both with proven results in commercial operation:

May 4 Session:  Annealing & Rolling Theory (Cold-sheet Rolling) 2-5 p.m. (Rm 14)

  • 4 p.m.  "HYDROPRIME® Gas Generators Provide Low-Cost, Reliable Hydrogen for Steelmaking."
    Presenters:  Goutam Shahani, Linde Engineering North America Inc.; Kyle Finley, Hydro-Chem; Tony Palermo, Linde LLC; Nick Onelli, Linde LLC; Larry Lyda, Hydro-Chem.

May 5 Session: Energy Efficiency Savings (Energy and Utilities) 2-5 p.m. (Rm 4)

  • 4:30 p.m.  "Oxygen Vacuum Pressure Swing Adsorption Systems (O2 VPSA) Enhance Steelmaking."
    Presenters: Tobias Geisler-Kahlert, Linde AG; Goutam Shahani, Linde Engineering North America Inc.

Linde LLC, a global leader in technologies and industrial gases for all steps in the steel mill process chain, offers solutions to help mills strike the right balance for process optimization and achieving production objectives through improved process reliability, cost efficiency, productivity and product quality.

Customized blast furnace solutions for oxygen enrichment and purging, for example, can help increase production capacity, decrease coke consumption, use lower-cost fuels and reduce fuel consumption. Operations can also benefit when combined with cost-saving oxyfuel solutions for electric arc furnaces through Linde partner MORE (of Italy) which supplies a range of EAF steelmaking packages, including burners and injection equipment. For the refining stage, Linde supplies argon and nitrogen to remove inclusions and homogenize molten metal temperature.

On-Site Hydrogen Supply
In the steel industry, hydrogen and nitrogen are used for bright annealing and metallic coating to provide an oxide-free surface in order to enhance the physical and chemical properties of steel. Proven worldwide, HYDROPRIME®, a unique steam methane reformer employing an integrated heat-recovery system, reduces the cost and improves the reliability of hydrogen supply targeted at larger 24/7 continuous demand requirements. HYDROPRIME® plants can produce 0.15–0.3 MMSCFD of 99.999% hydrogen at 200 psig.

On-Site Oxygen Supply
Linde oxygen vacuum pressure swing adsorption (O2 VPSA) systems can help a steelmaker achieve multiple objectives of increased energy efficiency, productivity, cost management and environmental performance. The fully automatic plants produce up to 200 t/d of oxygen at up to 94% purity, on demand with high availability and with low specific energy consumption. In addition, modular construction reduces field construction and commissioning time.

Linde, a leading global industrial gases company, provides industry-leading portfolio solutions for the ferrous and non-ferrous metallurgy industries, ranging from gases and equipment to process consulting and services. For more information, visit Linde at AISTech booth 2831, or contact Linde North America ( www.lindeus.com), 800-755-9277.

About Linde in North America
Linde LLC and Linde Engineering North America Inc. are members of The Linde Group. In the 2014 financial year, The Linde Group generated revenue of  USD 17.9 bn (EUR 17.047 bn), making it the largest gases and engineering company in the world with approximately 65,500 employees working in more than 100 countries worldwide. The strategy of The Linde Group is geared towards long-term profitable growth and focuses on the expansion of its international business with forward-looking products and services. Linde acts responsibly towards its shareholders, business partners, employees, society and the environment – in every one of its business areas, regions and locations across the globe. The company is committed to technologies and products that unite the goals of customer value and sustainable development.

For more information, visit www.lindeus.com

Logo - http://photos.prnewswire.com/prnh/20130530/NY23246LOGO-b

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/linde-industrial-gas-technologies-help-steelmakers-improve-operational-efficiencies-and-profitability-300073642.html

SOURCE Linde North America, LLC

Contact:
Linde North America, LLC
AISTech 2015
Amy Ficon, Corporate Communications, 908-771-1491, Fax 908-771-1460
Email Contact
Web: http://www.lindeus.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise