MSC Software’s Actran Helps Belgian Building Research Institute Validate Accuracy of New Acoustic Prediction Formula

NEWPORT BEACH, Calif. — (BUSINESS WIRE) — February 12, 2015MSC Software Corporation, a global leader in helping product manufacturers to advance their engineering methods with simulation software and services, today announced that The Belgian Building Research Institute (BBRI) used Actran acoustic simulation software (developed by FFT, an MSC Software Company) to validate the accuracy of a new acoustic prediction formula that will help architects comply with stricter acoustic requirements for dwellings.

“We used Actran to simulate in-line and corner structural waves transmission because of Actran’s proven ability to provide accurate results over a broad application range and because it is so easy to use,” said Charlotte Crispin, head of laboratory for BBRI. The results showed that the new formula more accurately predicts the vibration reduction index Kij that determines the flanking sound reduction between two adjacent rooms for in-line and corner transmission in T-junctions, X-junctions and H-junctions.

The stringent acoustical requirements imposed by the Belgian standard for dwellings present a major challenge for architects. In particular, the standard defines strict requirements for the global sound insulation between rooms which is mainly determined by the direct transmission and flanking transmissions in which sound waves produced in one of the rooms excite the flanking structure and generate structural waves which are transmitted through the structure. The flanking wall then radiates the sound in the adjoining room.

ISO 10848 defines a method for measuring Kij with physical testing; however, this is a long, tedious and expensive process. Because of the high cost and time involved in physical measurements, architects and acoustic consultants normally use empirical formulas set out in the EN 12354 standard in the design of new buildings. BBRI researchers, within a research activity supported by the Belgian Federal Government (NBN), measured Kij for approximately 185 different junctions and found that the EN 12354 standard prediction formulas left much to be desired. The researchers proposed a new formula based on the characteristic moment-impedances of the junction walls as opposed to the old formula which is based on the mass per unit area of the walls.

The researchers needed to accurately simulate structure-borne sound transmission over a wide range of wall properties in order to validate the new formula. BBRI researchers first used Actran to simulate a typical test setup and found that Actran’s predictions correlated well with physical measurements. After proving the accuracy of Actran’s results, BBRI researchers used the software for a parametric study of a T-Junction, X-junction and H-junction. The researchers evaluated the old and new formulas over 200 different junction designs and found that the new formula provides considerably higher accuracy than the old formula.

To learn more about Actran, please visit: http://www.mscsoftware.com/product/actran-acoustics

About Belgian Building Research Institute

The BBRI is a private research institute founded in 1960 by the Federation of Belgian Building Contractors. Its mission is to perform scientific and technical research for the benefit of its members, supply technical information, assistance and consultancy to its members and to contribute in general to innovation and development in the construction sector. Research focuses are on the construction process, building materials and all aspects of sustainable construction. The BBRI has 230 employees and three locations in Belgium.

About MSC Software

MSC Software is one of the ten original software companies and a global leader in helping product manufacturers to advance their engineering methods with simulation software and services. As a trusted partner, MSC Software helps companies improve quality, save time, and reduce costs associated with design and test of manufactured products. Academic institutions, researchers, and students employ MSC’s technology to expand individual knowledge as well as expand the horizon of simulation. MSC Software employs 1,100 professionals in 20 countries. For additional information about MSC Software’s products and services, please visit: www.mscsoftware.com

The MSC Software corporate logo, Simulating Reality, MSC Nastran, Adams, Actran, Digimat, Dytran, Easy5, Marc, Patran, MSC, MasterKey, MasterKey Plus, MaterialCenter, MSC Apex, SimDesigner, SimManager, and SimXpert are trademarks or registered trademarks of MSC Software Corporation and/or its subsidiaries in the United States and/or other countries. NASTRAN is a registered trademark of NASA.



Contact:

MSC Software Corporation
Leslie Bodnar, 714-540-8990




Review Article Be the first to review this article
SolidCAM - SolidCAM SEE IT LIVE

Featured Video
Jobs
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
System Designer/Engineer for Bluewater at Southfield, Michigan
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director, Business Development for Kongsberg Geospatial at Ottawa, Canada
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
Montréal Manufacturing Technology Show (MMTS) 2018 at Place Bonaventure Montréal Canada - May 14 - 16, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise