Dassault Systèmes Will Drive Adoption of Clean Energy Products as Part of $70 Million U.S. Department of Energy Grant

Dassault Systèmes Helped Form the Institute for Advanced Composites Manufacturing Innovation to Drive Clean Energy Product Development and Manufacturing

WALTHAM, Mass. — (BUSINESS WIRE) — January 9, 2015Dassault Systèmes (Paris: DSY) (Euronext Paris: #13065, DSY.PA), the 3DEXPERIENCE Company, world leader in 3D design software, 3D Digital Mock Up and Product Lifecycle Management (PLM) solutions, today announced it is a charter member of the Institute for Advanced Composites Manufacturing Innovation (IACMI), a 122-member consortium awarded a $70 million grant by the U.S. Department of Energy (DOE). The goal of the newly formed institute is to create better composite materials and technologies for rapid deployment within the automotive, wind turbine and compressed gas storage industries.

The new institute, announced today by President Obama, will focus on advanced fiber-reinforced polymer composites that combine strong fibers with tough plastics to yield materials that are lighter and stronger than steel. While advanced composites are used in selective industries such as aerospace, military vehicles, satellites and luxury cars, these materials remain expensive, require large amounts of energy to manufacture and are difficult to recycle. IACMI is dedicated to overcoming these barriers by developing low-cost, high-production, energy-efficient manufacturing and recycling processes for composites applications.

“Dassault Systèmes is proud to be a charter member of IACMI and will have the honor to work alongside partners in the non-profit sector, universities, national laboratories and private industry, as well as the Department of Energy’s Advanced Manufacturing Office to enable innovation and competitiveness in the U.S. manufacturing sector and drive the development of more efficient products,” said Bruno Latchague, Senior Executive Vice President, Americas Market and Global Sales Operations, Dassault Systèmes.

IACMI is the fifth named institute and another important step toward fulfilling the President’s vision of the National Network for Manufacturing Innovation (NNMI). The public-private partnership was selected through a competitive process led by the Advanced Manufacturing Office within the Department of Energy’s Office of Energy Efficiency and Renewable Energy. The DOE Clean Energy Manufacturing Innovation Institute’s award is supported by a $70 million Federal commitment over five years combined with an equal or greater amount in non-federal resources.

About Dassault Systèmes

Dassault Systèmes, the 3DEXPERIENCE Company, provides business and people with virtual universes to imagine sustainable innovations. Its world-leading solutions transform the way products are designed, produced, and supported. Dassault Systèmes’ collaborative solutions foster social innovation, expanding possibilities for the virtual world to improve the real world. The group brings value to over 190,000 customers of all sizes, in all industries, in more than 140 countries. For more information, visit www.3ds.com.

3DEXPERIENCE, the Compass icon, the 3DS logo, CATIA, SOLIDWORKS , ENOVIA, DELMIA, SIMULIA, GEOVIA, EXALEAD, 3D VIA, BIOVIA, NETVIBES, 3DSWYM and 3DEXCITE are commercial trademarks or registered trademarks of Dassault Systèmes or its subsidiaries in the United States and/or other countries.



Contact:

Dassault Systèmes Press Contacts
NAM
Suzanne MORAN, +1 781-810-3774
Email Contact
or
NAM
Greg SABEY, +1 781-810-3790
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise