EOS at EuroMold 2014: Further Expansion of the Comprehensive, Industry-Leading Range of Services Offerings

 Active support with developing customer skills and carrying out validation processes: Technical Services, Quality Management and Consulting Services

Frankfurt/Germany, November 25, 2014 – EOS, the global technology and quality leader for high-end Additive Manufacturing (AM) solutions, continues to invest in the further extension of its service portfolio in future in view of the increased use of EOS technology for series production. Adrian Keppler, Chief Marketing Officer (CMO) at EOS, explains: "The very positive feedback from the last customer satisfaction survey shows that we already offer the most comprehensive industry-wide services in global comparison. We are extremely pleased about this, but at the same time it is an incentive to continue developing our service portfolio and team in future. The main focus of this development is on top-class quality."

He adds, "As far as series production is concerned, we usually have to deal with very complex customer requirements. The introduction of a new technology like Additive Manufacturing is often a very long drawn-out process. Firstly, we provide our customers with active support in building up their own technology skills. Secondly, we are the only supplier in the industry to actively support customers with especially high, industry-specific quality requirements in the validation process. This is the only way to ensure that our customers can gain optimum benefit from the great potentials offered by industrial 3D printing."

Added value through service: regional, varied, experienced, excellent

With the services offered, EOS provides its customers with expert support in all areas of Additive Manufacturing. As a result, these benefit from increased productivity, optimised product quality and increased investment protection.

EOS has a worldwide reputation for quality, reliability and safety. It is the only company in the AM segment to offer a global service for all the performance and life cycle phases of its products. To achieve this, the global EOS service organisation has four regional service centres close to customers with excellently qualified service employees on three continents – Europe, North America and Asia/Pacific. An increasing number of local service locations with their own spare parts stores guarantees closeness to our customers. The EOS service offers were created as best practice solutions in close dialogue with customers. Established processes and standards guarantee a consistently high service quality.

The global EOS service organization already has well over 100 employees, no less than about 80 of whom are field service technicians and around 30 are application specialists. This team will be expanded continually on all levels over the next few years. There is a strong team behind the experienced technical field team as well; the hotline (which also offers remote services), 2nd level support (service experts for particular EOS products) and 3rd level support (specialists from the Development department). An experienced team of trainers introduces different user groups to the handling of EOS solutions, either on the customer's premises or at one of the EOS regional centres. Application specialists provide additional customer support with feasibility studies and provide consultation and development services. Adrian Keppler concludes: "We are investing a great deal in the training of our service team so that we can continue to guarantee worldwide high service quality."

Jürgen Blöcher, Managing Director of FKM Sintertechnik in Germany and a long-standing customer, elaborates: "Together, the employees of EOS and FKM are a strong team. We are very pleased to have an efficient and reliable technology and service partner at our side in EOS. An impressive proof of this efficiency was the relocation and servicing of 21 EOS systems for plastic and metal within only six weeks. This made an important contribution to the successful start of operations in our new production building."

Launch of Additive Manufacturing (AM) Consulting Services

Following intensive analysis of the current market conditions, EOS has identified a central dilemma which leads to many customers still not fully exploiting the full potential of Additive Manufacturing in their value creation chains. Within the context of Additive Manufacturing (AM) Consulting Services, EOS now supports customers with tapping these potentials even better and thus achieving a clear competitive advantage. AM Consulting Services help customers to achieve a significantly higher level of performance in different phases and to fix this long-term in the organisation and value creation chain.

About EOS

Founded in 1989, EOS is the global technology and quality leader for high-end Additive Manufacturing (AM) solutions. As the leading pioneer of Direct Metal Laser Sintering (DMLS™) technology, EOS also provides a unique polymer AM portfolio. For these industrial 3D Printing processes, EOS offers a modular solution portfolio including systems, software, materials, technical and consulting services. EOS is the partner of choice for industrial AM production, enabling sustainable solutions for the industry. Customers utilizing EOS AM solutions gain many benefits from the paradigm-shifting technology: lightweight structures, cost reduction based on functional integration, individualization as well as accelerated product development and production. For more information please visit www.eos.info.

Contact:

EOS GmbH Electro Optical Systems

Claudia Jordan

Public Relations Specialist

Phone: +49 (0)89 893 36 2134

E-Mail: Email Contact

 

      




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise