Stratasys Reports Record Second Quarter Financial Results

Stratasys Ltd. Q2-2014 Conference Call Details

Stratasys will hold a conference call to discuss its second quarter financial results on Thursday, August 7, 2014 at 8:30 a.m. (ET).

The investor conference call will be available via live webcast on the Stratasys Web site at under the "Investors" tab; or directly at the following web address:

To participate by telephone, the domestic dial-in number is 877-415-3180 and the international dial-in is 857-244-7323. The access code is 84391755. Investors are advised to dial into the call at least ten minutes prior to the call to register. The webcast will be available for 90 days on the "Investors" page of the Stratasys Web site or by accessing the provided web address.

Cautionary Statement Regarding Forward-Looking Statements

Certain information included or incorporated by reference in this press may be deemed to be “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, and Section 21E of the Securities Exchange Act of 1934. Forward-looking statements are often characterized by the use of forward-looking terminology such as “may,” “will,” “expect,” “anticipate,” “estimate,” “continue,” “believe,” “should,” “intend,” “project” or other similar words, but are not the only way these statements are identified. These forward-looking statements may include, but are not limited to, statements relating to the company’s objectives, plans and strategies, statements that contain projections of results of operations or of financial condition (including, with respect to acquisitions) and all statements (other than statements of historical facts) that address activities, events or developments that the company intends, expects, projects, believes or anticipates will or may occur in the future. Forward-looking statements are not guarantees of future performance and are subject to risks and uncertainties. The company has based these forward-looking statements on assumptions and assessments made by its management in light of their experience and their perception of historical trends, current conditions, expected future developments and other factors they believe to be appropriate. Important factors that could cause actual results, developments and business decisions to differ materially from those anticipated in these forward-looking statements include, among other things: the company’s ability to efficiently and successfully integrate the operations of Stratasys, Inc. and Objet Ltd. after their merger as well as MakerBot, Solid Concepts, and Harvest Technologies after their acquisitions and to successfully put in place and execute an effective post-merger integration plans; the overall global economic environment; the impact of competition and new technologies; general market, political and economic conditions in the countries in which the company operates; projected capital expenditures and liquidity; changes in the company’s strategy; government regulations and approvals; changes in customers’ budgeting priorities; litigation and regulatory proceedings; and those factors referred to under “Risk Factors”, “Information on the Company”, “Operating and Financial Review and Prospects”, and generally in the company’s annual report on Form 20-F for the year ended December 31, 2013 filed with the U.S. Securities and Exchange Commission (the “SEC”), in the “Risk Factors” attached as Exhibit 99.3 to the Report of Foreign Private Issuer on Form 6-K furnished by the company to the SEC on the date hereof, and in other reports that the company has furnished to, or filed with the SEC. Readers are urged to carefully review and consider the various disclosures made in the company’s SEC reports, which are designed to advise interested parties of the risks and factors that may affect its business, financial condition, results of operations and prospects. Any forward-looking statements in this press release are made as of the date hereof, and the company undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Non-GAAP Discussion Disclosure

The information discussed within this release includes financial results and projections that are in accordance with accounting principles generally accepted in the United States of America (GAAP). In addition, certain non-GAAP financial measures have been provided excluding certain charges, expenses and income. The non-GAAP measures should be read in conjunction with the corresponding GAAP measures and should be considered in addition to, and not as an alternative or substitute for, the measures prepared in accordance with GAAP. The non-GAAP financial measures are included in an effort to provide information that investors may deem relevant to evaluate results from the company’s core business operations and to compare the company’s performance with prior periods. The non-GAAP financial measures primarily identify and exclude certain discrete items, such as merger-related expenses, amortization expenses and expenses associated with share-based compensation required under ASC 718. The company uses these non-GAAP financial measures for evaluating comparable financial performance against prior periods.

This release is available on the Stratasys web site at

Stratasys Ltd. (Nasdaq: SSYS), headquartered in Minneapolis, Minnesota and Rehovot, Israel, is a leading global provider of 3D printing and additive and additive manufacturing solutions. The company's patented FDM®, PolyJet™ and WDM™ 3D Printing technologies produce prototypes and manufactured goods directly from 3D CAD files or other 3D content. Systems include 3D printers for idea development, prototyping and direct digital manufacturing. Stratasys subsidiaries include MakerBot and Solidscape, and the company operates a digital-manufacturing service comprising RedEye, Solid Concepts and Harvest Technologies. Stratasys has more than 2,500 employees, holds over 560 granted or pending additive manufacturing patents globally, and has received more than 25 awards for its technology and leadership. Online at: or .

« Previous Page 1 | 2 | 3 | 4 | 5  Next Page »

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Colortrac: LearnMore
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise