Data Presented at IMAST Shows Over 99 Percent Accuracy When Placing Screws with Mazor Robotics Renaissance Guidance System

ORLANDO, Fla. — (BUSINESS WIRE) — July 17, 2014Mazor Robotics, Ltd. (TASE: MZOR; NASDAQ GM: MZOR), a developer of innovative guidance systems and complementary products, announced results of data being presented July 16-19 at the 21st International Meeting on Advanced Spine Techniques (IMAST) meeting in Valencia, Spain.

An e-poster entitled, Retrospective, Five-Center Analysis of 3,270 Pedicle Screws Placed with Robotic Guidance in Adolescent Idiopathic Scoliosis (AIS), reports that 223 patients with AIS in five centers, had a total of 3,270 pedicle screws placed using the Renaissance system with over 99 percent accuracy.

A podium presentation, entitled, Retrospective Analysis of Feasibility and Performance of Robotic Guidance for Placement of Pedicle Screws in 223 Adolescents with Idiopathic Scoliosis (AIS), highlights that 3,270 screws were placed with the Renaissance system while fluoroscopy use was limited to 1.58 seconds per screw.

“Anatomic constraints in AIS frequently confound placement of pedicle screws, especially when instrumenting the most deformed regions of a curved spine,” said Dr. Dennis P. Devito of Children’s Healthcare of Atlanta, one of the lead investigators of the study. “The accuracy of screw placement and reduced exposure to radiation per case results in safer operations for both the patient and surgical staff.”

Other researchers involved in the study included:

Dr. Isador Lieberman, Texas Back Institute, Plano, TX

Dr. Samuel Bederman, UC Irvine Medical Center, Irvine, CA

Dr. Raymond Woo, Florida Hospital for Children, Orlando, FL

Dr. Sajan Hegde, Apollo Hospitals Chennai, Chennai, India

About The Renaissance System

Mazor Robotics Renaissance system is the only mechanical guidance system cleared by the US Food and Drug Administration for use in both spine and brain surgery.

To date, thousands of spine procedures have been performed with the Renaissance system, ranging from minimally-invasive one-level fusions to complex deformity reconstructions.

About Mazor

Mazor Robotics is dedicated to the development and marketing of innovative surgical guidance systems and complementary products that provide a safer surgical environment for patients, surgeons, and operating room staff. Mazor Robotics’ flagship product, Renaissance®, is a state-of-the-art surgical guidance system that enables surgeons to conduct spine and brain procedures in an accurate and secure manner. Mazor Robotics systems have been successfully used in the placement of over 45,000 implants worldwide. Numerous peer-reviewed publications and presentations at leading scientific conferences have validated the accuracy, usability, and clinical advantages of Mazor Robotics technology. For more information, the content of which is not part of this press release, please visit www.mazorrobotics.com.



Contact:

U.S. Contacts: EVC Group
Investors:
Michael Polyviou, 212-850-6020
Email Contact
Robert Jones, 646-201-5447
Email Contact
or
Media:
Dave Schemelia, 646-201-5431
Email Contact




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise