Lomiko Announces Discovery of 23 New High Priority Magnetic Anomalies at Quatre Milles Flake Graphite Property

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- Jul 14, 2014 -- LOMIKO METALS INC. (TSX VENTURE: LMR)(PINKSHEETS: LMRMF)(FRANKFURT: DH8B) (the "Company") reports Consul-Teck of Val-d'Or and consulting firm Dube & Desaulniers conducted a combined Magnetic and Very Low Frequency Electro-Magnetic (VLF-EM) survey on the West Block of the Quatre Milles Project for a total of 209.6 linear km. The survey is part of an extensive and comprehensive exploration plan at Quatre Milles for the 2014 season.

The goal of the program is to identify high grade, near surface graphite mineralization suitable for conversion to battery-grade graphite. The graphite industry could see exponential growth based on new demand for lithium-ion batteries which use 10 to 15 times as much graphite as lithium.

Telsa Motor Cars announced, "As we at Tesla reach for our goal of producing a mass market electric car in approximately three years, we have an opportunity to leverage our projected demand for lithium ion batteries to reduce their cost faster than previously thought possible."

Lomiko is also an investor in Graphene 3D Lab as of November 22, 2013 which aims to pioneer the manufacturing of electronic devices using graphene 3D printing filament and graphene printers. Currently, there are 11,000 patented or patent-pending graphene technologies which will require graphene material. Large companies such as General Electric, Lockheed-Martin and Samsung have confirmed their interest in Graphene uses. The graphite industry may see increased demand as a base material for the production of graphene. Lomiko will be able to participate in this new demand due to initial test results September 17, 2013 indicating graphite from Quatre Milles was converted to graphene oxide.

Previously reported drill results at Quatre Milles indicate extensive mineralization in the region. The Quatre Milles Project NI 43-101 Technical Report with all Phase I and historical drill hole results is available on the Lomiko web site. On March 13, 2014, Lomiko closed a financing for $ 5.5 million for the purposes of advancing the Quatre Milles Property and investing in technology.

In total, 88 VLF-EM conductors axis were identified. Of those, 23 new conductors are prioritized for further review. Conductors that are associated to magnetic anomalies are likely caused by pyrrhotite rich sulphide occurrences. However, most of the conductors do not show correlation with the magnetic signal and the strongest VLF-EM anomalies are thus possibly caused by graphite mineralization.

Lomiko will initially investigate the outlined anomalies by basic prospecting methods and follow-up with drilling at identified graphite zones. Strong magnetic anomalies that are not responding to the VLF-EM method also deserve further investigation. Sources identified as promising for mineralization discoveries could then be the object of resistivity/IP surveys that can be efficiently used to penetrate the ground at further depth and better image the geometry of conductive and chargeable sources.

Jean-Sebastien Lavallee (OGQ #773), geologist, a Qualified Person as defined by National Instrument 43-101, has reviewed and approved the technical content of this release.

On Behalf of the Board

A. Paul Gill, Chief Executive Officer

We seek safe harbor. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contacts:
Lomiko Metals Inc.
A. Paul Gill
604-729-5312

info@lomiko.com

www.lomiko.com





Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise