Mentor Graphics Tools Fully Enabled on Intel's 14nm Processes for Customers of Intel Custom Foundry

WILSONVILLE, Ore., June 3, 2014 — (PRNewswire) —   Mentor Graphics Corp. (NASDAQ: MENT) and Intel Corporation today announced that Mentor's circuit simulation and sign-off tools are fully enabled for Intel's 14nm Tri-Gate process technology for customers of Intel Custom Foundry. Mentor® and Intel Custom Foundry are providing models and rule decks for circuit simulation, design rule checking (DRC) and layout vs. schematic checking (LVS) for mobile and cloud infrastructure applications. Current collaboration efforts have resulted in a 2X speed up in full chip Calibre® DRC™ verification run times.  Readiness of the Mentor's baseline circuit simulation and sign-off tools on Intel Custom Foundry 14nm design platform provides customers with access to Intel's 14nm technology and Mentor's simulation and verification tools.

Mentor Graphics logo.

Intel Custom Foundry has created design platforms on 14nm and 22nm on Intel's Tri-Gate process technology. Intel's 14nm process technology uses the second generation of 3-D Tri-Gate transistors. These Tri-Gate transistors enable chips to operate at lower voltage with lower leakage, providing an unprecedented combination of improved performance and energy efficiency compared to planar transistors. The platform capabilities give chip designers the flexibility to choose transistors targeted for low power or high performance, depending on the application.

"We are very happy to be working with Mentor Graphics to ensure that a full suite of simulation and verification solutions are in place and optimized for our 14nm processes," said Venkat Immaneni, Senior Director of Foundry Design Kit Enablement at Intel Custom Foundry. "This means our mutual customers can use the tools they have in place and are comfortable with, while taking advantage of Intel's process leadership."

The Analog FastSPICE circuit simulator for nanometer analog, mixed-signal and RF verification delivers foundry-certified SPICE accuracy and industry-leading performance, capacity and device noise analysis. The Calibre nmDRC™ and Calibre nmLVS™ platforms help teams optimize their designs to meet process requirements, providing industry-leading cycle time and physical verification accuracy. Customers are now able to apply these differentiated capabilities to designs targeted on Intel Custom Foundry's design platform.

"We're pleased to formally announce our collaboration with Intel Custom Foundry," said Michael Buehler-Garcia, Senior Director of Marketing for Calibre Design Solutions at Mentor Graphics. "Our goal is to give fabless semiconductor companies the ability to fully optimize their designs to leverage all the features that Intel's 14nm process provides."

About Mentor Graphics

Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in the last fiscal year in excess of $1.15 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/ .

About Intel

Intel (NASDAQ: INTC) is a world leader in computing innovation. The company designs and builds the essential technologies that serve as the foundation for the world's computing devices. Additional information about Intel is available at newsroom.intel.com and blogs.intel.com.

(Mentor Graphics, Mentor, and Calibre are registered trademarks and DRC, nmDRC, nmLVS are trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)

Intel, the Intel logo and Core are trademarks of Intel Corporation in the United States and other countries.

For more information, please contact:

Gene Forte

Mentor Graphics

503.685.1193

gene_forte@mentor.com

Chuck Mulloy

Intel Corporation

408-765-3484

cmulloy@intel.com

 

Gene Forte, Mentor Graphics, 503.685.1193, gene_forte@mentor.com; or Chuck Mulloy, Intel Corporation, 408-765-3484, cmulloy@intel.com

Logo - http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO
Logo - http://photos.prnewswire.com/prnh/20140530/92936

SOURCE Mentor Graphics

Contact:
Mentor Graphics
Web: http://www.mentor.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise