Industry Partnership Forms “Complete Solution” — Edgecam, Roemheld and Seco

July 15, 2013

Edgecam celebrated 30 years in the CAD/CAM industry by holding a productivity event at Seco’s new Technology Centre. Manufacturers from around the country attended the seminar, where they learned from Seco’s Business Development Manager – Products, David Magnall, how a dedicated partnership of suppliers forms “the complete solution for the metal cutting industry.”

Presentations from Edgecam, Seco, and workholding specialists Roemheld showed over 130 delegates representing all industry sectors:
• How Edgecam’s new Workflow application will help them reduce costs, improve quality and hit shorter lead times
• The essential differences between high speed machining and high feed milling
• How to future-proof their workholding investments.

Edgecam engineer Mike O’Neill said Workflow – which was introduced in Edgecam 2013 R2 – and the Waveform Roughing Strategy launched last year, are the most significant developments in Edgecam’s history. He and Pre Sales Manager Lee Richards detailed how Workflow automatically loads a part in the correct manufacturing environment, with datum set, enabling CAD/CAM engineers to apply toolpaths within seconds.

Live machining demonstrations were held on a Mori Seiki and AgieCharmilles Mikron showing how Waveform maximises material removal rates while delivering shorter cycle times and prolonging both tool and machine tool life...along with 5-axis machining.

Steve Heatherglen, Seco’s Product Manager for Indexable Milling, explained the theory behind high speed machining, outlining machine tool requirements such as NC control, block cycle times, machine rapidity, spindles and run out. He showed how harder carbide tools were used with small arcs of contact, creating small radial cutting depths. And he highlighted its difference from high feed milling, which he said was a roughing process designed to remove as much material as possible in the shortest time.

Delegates were also shown how workholding for 5-axis components is “totally different” from standard positioning.  Roemheld Managing Director Bill Neal said the growing complexity of components means 5-axis machining is becoming increasingly more popular, and he outlined how to “future-proof” workholding investments for access, component handling, positioning, repeatability and rigidity.

Edgecam users said they found the event invaluable in keeping up with Edgecam’s latest “game-changing” developments.
• Tom Newbery (pictured below), Technical Director of VES Precision Ltd, said Workflow will dramatically speed up the programming of parts for their aerospace and food industry components, and Waveform has already considerably extended tool life.

• Waveform is now Aerogrind Tooling’s default roughing strategy, according to Managing Director Tim Shillabeer (below), who said: “We’ve used it successfully in many recent applications.” And he forecast that Workflow will enable him to provide a better, faster and more efficient service to customers. “It’ll speed up the programming process, so we can start cutting metal much quicker than in the past.”   

• Andrew Wright (below), Production Engineer for both Newburgh Engineering and the Nuclear Advanced Manufacturing Research Centre, expects Workflow to reduce part setting up time. “It’ll take out a lot of the mundane operations that we do day to day, such as repeats, rotations, orientating them in the correct way, and setting stock. Basically it’ll reduce the nuts and bolts of setting the part up and getting to the toolpath generation much quicker.”

The seminar also looked at other new and enhanced functionality in Edgecam 2013 R2, including moving faces, the 3D Mirror procedure and the Analyse Profile command in Part Modeler.

Lee Richards said a major benefit comes from the Part Modeler CAD Loader options for NX, ACIS, Inventor, CATIA V5 and Creo Parametric now being included in the Edgecam Part Modeler and Solid CAD/CAM core licenses.

Turning enhancements include support for multiple turrets with the Siemens and Mori Seiki code wizards...the intention is to roll this out to more templates in future releases...and a new Finish Groove cycle.

Milling cycles have been updated to allow boundaries to be selected directly from solid edges without the need to create wireframe geometry from edges or Edge Loop Features first.

In previous versions of Edgecam, each time the simulator was started the entire toolpath was sent from start to finish, along with all the model data. An update in 2013 R2 means it picks up where the simulation last finished.
New functionality in the Wire EDM module introduces the ability to create “User Technology,” selected in the same way as Machine Technology. Materials and Wires are added from the Machining Sequence start up.  Cuts can be saved to the User database on the Cycle dialog technology page with a unique, identifying name. After saving the cuts, the new technology will be listed on the technology database page. Selecting a technology populates the Cut Technology page within the database settings. Existing Machine Technology cut data can also be amended and saved as a new User Technology.

A new Wire Profile Feature command has been added to find “wireable” features directly from a solid, removing the need to extract geometry from a solid body, which can be time-consuming. Multiple 2D and lofted form features can be created within one transaction. Moreover, the Wire Feature is associate to the solid body, meaning that if the original model is altered, the wire path is automatically updated.

The event also celebrated Edgecam’s 30th anniversary, with long-standing Edgecam users Tom Newbery and Middlesex Group’s Alan Dougall cutting a birthday cake.

Click here to see a video of the event:  

Email Contact


Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Colortrac: LearnMore
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise