Optomec and Stratasys to Present at 25th Annual Additive Manufacturing User Group Conference

Presentation to Highlight Advancements in Merger of 3D Printing with Printed Electronics

ALBUQUERQUE, N.M. — (BUSINESS WIRE) — April 10, 2013 — Optomec announced today that it will present Aerosol Jet systems for 3D printed electronics at the Additive Manufacturing User Group Meeting (AMUG) being held at the Hyatt Regency Jacksonville Riverfront from April 14-18, 2013. Ryan Sybrant, Business Development Manager at Stratasys, (NASDAQ: SSYS) and Ken Vartanian, Marketing Director at Optomec will deliver a joint presentation titled “3D Printed Electronics” on April 16 at 1:30 pm.

The presentation highlights how Stratasys, Optomec and Aurora Flight Sciences collaborated on a project to demonstrate how these technologies were combined to print electronic structures including antennas, strain gauges, a power circuit, and a signal circuit directly onto the surface of a Stratasys 3D Printed wing structure. The presentation will explain the capabilities of the combined technologies, unique integration requirements, and current challenges. Fused Deposition Modeling (FDM) is an additive manufacturing process that can build three dimensional parts out of high strength thermal plastics directly from a Computer Aided Design (CAD) model. Aerosol Jet is an additive manufacturing process that can deposit conductive inks and other electronic materials onto a wide variety of substrates including 3D surfaces. The combination of these two technologies has the potential to offer designers new options to produce highly integrated designs resulting smaller, lighter weight products. For a video demonstration of the UAV smart structure, click here.

The unique ability of Aerosol Jet systems to print fine line conformal circuitry on non planar surfaces is a key enabler for fully printing electronics onto 3D surfaces. The relatively large stand-off, up to 5mm from the nozzle tip to the substrate, and high velocity particle stream enable the Aerosol Jet material deposition head to print on inclined surfaces without tilting the head. For more information on Aerosol Jet printing, click here.

AMUG is an independent, industry-wide users group that gives its members a forum for learning, information exchange and establishing professional connections. AMUG educates and supports users of all additive manufacturing technologies. The primary charter of the group remains the same, but its members are much more diversified, global and focused in advancing additive manufacturing technology for rapid manufacturing and prototyping. With AMUG's expanded range, operators/owners of any commercial technology — stereolithography, selective laser sintering, 3D printing, FDM, and more can benefit from the information exchange and professional network that AMUG offers.

Optomec is a privately-held, rapidly growing supplier of Additive Manufacturing systems. These solutions utilize Optomec’s patented Aerosol Jet Printed Electronics technology and LENS Printed Metal technology to reduce costs and improve performance. Together, these unique 2D and 3D printing solutions work with the broadest spectrum of functional materials, ranging from electronic inks to structural metals and even biological matter. Optomec has more than 150 marquee customers around the world, targeting production applications in the Electronics, Energy, Life Sciences and Aerospace industries.

Aerosol Jet is a registered trademark of Optomec, Inc.

LENS is a trademark of Sandia National Laboratories.

Fused Deposition Modeling is a trademark, and FDM, Fortus, Dimension, uPrint and Stratasys are registered trademarks of Stratasys Inc.



Contact:

Optomec
Shayna Watson, 505-761-8250
Email Contact
www.optomec.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise