Dassault Systèmes’ 3DEXPERIENCE Platform Adopted by Olympus Technologies Singapore to Accelerate Medical Device Time to Market

Leveraging New “Licensed to Cure” Industry Solution Experience to Harmonize Product Development Operations in a Single Environment

SINGAPORE — (BUSINESS WIRE) — December 18, 2012Dassault Systèmes (Euronext Paris: #13065, DSY.PA) (Paris: DSY), the 3DEXPERIENCE Company, world leader in 3D design software, 3D Digital Mock Up and Product Lifecycle Management (PLM) solutions, today announced that Olympus Technologies Singapore Pte Ltd, a leading endoscope manufacturer, has selected Dassault Systèmes’ 3DEXPERIENCE platform for the development of its medical devices. The new “Licensed to Cure” industry solution experience will be deployed to create a single environment, allowing to eliminate scattered processes and data, and to “embed” regulations as an asset, optimizing quality and compliance.

Olympus Technologies Singapore has standard operating procedures in developing engineering and software system documentation for their medical device manufacturing. “Licensed to Cure” will help them simplify those procedures by providing a single source of information to always get relevant, up-to-date information and establish true collaboration with the same, accurate set of product data. In addition, Olympus Technologies Singapore will be able to reduce new product time to market and streamline regulatory filings by creating an end-to-end, traceable and compliant product development process directly linked to quality management.

“Dassault Systèmes’ 3DEXPERIENCE platform gives us centralized control and management of all product lifecycle information, enabling real time sharing and collaboration for all functions,” said Lim HN, managing director, Olympus Technologies Singapore. “Being able to combine engineering, quality, and regulatory compliance business processes, we have moved closer towards becoming the R&D and manufacturing centre of choice for our customers.”

“The shifting financial, regulatory and globalization landscapes faced by medical devices manufacturers really call for a comprehensive business experience that can keep up with complexity, lower cost, quality, and compliance at once,” said Monica Menghini, Executive Vice President, Industry and Marketing, Dassault Systèmes. “ Our new “Licensed to Cure” industry solution experience is exactly meeting this challenge by allowing companies like Olympus Technologies Singapore to manage their business objectives in a complex regulatory environment while meeting consumers’ expectations for safe products.”

For more information on “Licensed to Cure” and all of Dassault Systèmes’ industry solution experiences for Life Sciences: http://www.3ds.com/solutions/life-sciences/overview/

###

About Dassault Systèmes

Dassault Systèmes, the 3DEXPERIENCE Company, provides business and people with virtual universes to imagine sustainable innovations. Its world-leading solutions transform the way products are designed, produced, and supported. Dassault Systèmes’ collaborative solutions foster social innovation, expanding possibilities for the virtual world to improve the real world. The group brings value to over 150,000 customers of all sizes, in all industries, in more than 140 countries. For more information, visit www.3ds.com.

CATIA, SOLIDWORKS, SIMULIA, DELMIA ENOVIA, GEOVIA, EXALEAD, NETVIBES, 3DSWYM and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.



Contact:

Dassault Systèmes Press Contacts
Derek Lane (NAM)
Email Contact
+1 (818) 673-2243
or
Elena Fernandez (LATAM)
Email Contact
+1 (978) 442-2790
or
Virginie Blindenberg (EMEA)
Email Contact
+33 (0) 1 61 62 84 21
or
Namrata Gadhok (India)
Email Contact
+91 (124) 457 7100
or
Arnaud Sobrero (AP South)
Email Contact
+65 6511 7942
or
Grace Mu (China)
Email Contact
+86 10 6536 2288
or
Jahyun Ahn (Korea)
Email Contact
+82 2 3270 7893
or
Yukiko Sato (Japan)
Email Contact
+81 3 5442 6445
or
Arnaud Malherbe (CORP/France)
Email Contact
+33 (0) 1 61 62 87 73




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise