Pratt & Whitney Canada Selects Dassault Systèmes’ 3DEXPERIENCE Platform

Aircraft Engine Maker Chooses ENOVIA Application after Benchmark; Integrated Process Planning, Quality, Requirements Management, and Platform Openness Were Key Success Factors

 

MONTREAL & VELIZY-VILLACOUBLAY, France  November 8, 2012: Dassault Systèmes (Euronext Paris: #13065, DSY.PA) (Paris: DSY), the 3DEXPERIENCE Company, world leader in 3D design software, 3D Digital Mock Up and Product Lifecycle Management (PLM) solutions, today announced that Pratt & Whitney Canada (P&WC), a world leader in the design, manufacture and service of aircraft engines, has selected the 3DEXPERIENCE platform to run its enterprise integrated product management process. A longtime customer of Dassault Systèmes’ design authoring and collaboration applications, P&WC has started “Phase One” of its enterprise PLM evolution. The focus of Phase One is on improving operational excellence, integrated process planning, quality and requirements management.

“In the end, this is about transforming our business and improving our customers’ experience. Every second, a P&WC-powered airplane takes off or lands somewhere in the world and our goal is to ensure the highest quality, best service cost, and overall product value for those customers. Dassault Systèmes’ 3DEXPERIENCE platform fits perfectly into that vision of a quality product and customer experience,” said Walter Di Bartolomeo, vice president, Productivity & Engineering, Pratt & Whitney Canada. “From both an operational perspective, as well as a product value perspective, we see that implementing the 3DEXPERIENCE platform is good for the business. ENOVIA applications give us the ability to be more effective. And that gives us the capacity, capability and affordability to go and reinvest in new products and new services.”

Dassault Systèmes’ 3DEXPERIENCE platform and its associated ENOVIA applications were successfully benchmarked against various other solutions and competitors. The enterprise platform and its openness to Pratt & Whitney Canada’s heterogeneous solution environment, including SAP and Microsoft Dynamics, featured highly in the final decision, as well as Pratt & Whitney Canada’s close working partnership with Dassault Systèmes.

In parallel with Phase One, P&WC has been working to define a blueprint for the next phase of PLM in a true enterprise-wide business transformation.

“We’re excited to be part of P&WC’s successful deployment of Phase One. But that’s just Phase One. We are committed to ensuring the success of ALL future phases in P&WC’s strategic integrated product management process evolution,” said Sylvain Laurent, executive vice president, Business Transformation, Dassault Systèmes.

“3DEXPERIENCE is about addressing complexity, helping our customers, such as Pratt & Whitney Canada, reinvent their business processes and transform the way work is done on a day to day basis. Our 3DEXPERIENCE platform is designed to allow a customer to use its entire set of data throughout enterprise processes, to make the right decisions for its business,” said Monica Menghini, executive vice president, Industry and Marketing, Dassault Systèmes. “As with every industry solution experience Dassault Systèmes creates, it is, at the end of the day, about enabling a dramatic improvement in the quality of our customer’s product experience.”

###

About Dassault Systèmes

Dassault Systèmes, the 3DEXPERIENCE Company, provides business and people with virtual universes to imagine sustainable innovations. Its world-leading solutions transform the way products are designed, produced, and supported. Dassault Systèmes’ collaborative solutions foster social innovation, expanding possibilities for the virtual world to improve the real world. The group brings value to over 150,000 customers of all sizes, in all industries, in more than 140 countries. For more information, visit www.3ds.com.

CATIA, SOLIDWORKS, SIMULIA, DELMIA, ENOVIA, GEOVIA, EXALEAD, NETVIBES, 3DSWYM and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.

 

 



Contact:

Dassault Systèmes
Press
Corporate / France
Arnaud MALHERBE, +33 (0)1 61 62 87 73
Email Contact
or
North America
Derek LANE, +1 (818) 673-2243
Email Contact
or
Latin America
Elena FERNANDEZ, +1 (978) 442-2790
Email Contact
or
EMEA
Virginie BLINDENBERG, +33 (0) 1 61 62 84 21
Email Contact
or
India
Namrata GADHOK, +91 (124) 457 7100
Email Contact
or
China
Grace MU, +86 10 6536 2288
Email Contact
or
AP South
Arnaud SOBRERO, +65 6511 7942
Email Contact
or
Korea
Jahyun AHN, +82 2 3270 7893
Email Contact
or
Japan
Yukiko SATO, +81 3 5442 6445
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise