The EDA & MCAD/MCAE Almanac – Nominal Q2 2012

The factors in the last column for each area of the world served by Altium are generated by dividing sales totals of three quarters YTD for 2012 by the three quarters YTD for Fiscal 2011, after converting any euro numbers to US$.

POSSIBLE SCENARIOS: The lower right hand corner shows that THRU 9 mo. OF FY 2012, TOTAL ALTIUM SALES WERE 23.13% AHEAD OF 9 mo. of FY 2011.

EVEN IF Q4 ends up AN AVERAGE 2012 QUARTER, SALES FOR 2012 WILL BE AT LEAST $55832 VS $50590, OR GROWTH IN SALES FOR THE YEAR OF 10.45%.

IF Q4 2012 SALES MATCH THE ABSOLUTE TOTAL OF Q4 2011, WHICH WAS 50590 – 33398 = $17192, THEN 2012 COULD TOTAL $58316 = 15.27% GROWTH YEAR OVER YEAR.

IF SOMEHOW ALTIUM WERE TO CLOSE $20,000 SALES IN Q4 2012, GROWTH FOR THE 2012 YEAR WOULD BE 61124/50590 = 20.82% GROWTH IN SALES FOR YOY 2012 VS 2011. (RFH 6-20-12).

NOTE: ACTUAL ALTIUM SALES FIGURES FOR 4th QUARTER to be eventually posted in the SEPTEMBER Almanac for NOMINAL Q2 2012) ACTUALLY REPORTED BY ALTIUM ON JULY 25, 2012 WERE $21.2 MILLION!


September 14, 2012

Finally, today’s COMMENTARY dated September 14, 2012 contains the next CHAPTER OF THE EDA & MCAD/MCAE INDUSTRY ALMANAC – NOMINAL Q2 2012.

Note: As THIS SEPTEMBER 14, 2012 issue is posted, current plans are for the total Q2 2012 Almanac ultimately to have four (4) separate chapters, each with its own initial publication date. As each new chapter is posted, the new chapter is published in full, and any previous chapters will be easily referred to by inclusion of the previous chapter’s URL. This will permit the full almanac to be conveniently presented when each chapter at last becomes available.

IN SUMMARY, the NOMINAL Q2 2012 ALMANAC WILL

HAVE FOUR CHAPTERS WHEN IT IS EVENTUALLY COMPLETED:

CHAPTER TITLE FORMAT FIRST POSTING

ONE A Profile of Forte Design Systems COMMENTARY Sept. 14, 2012

TWO ALTIUM PIECE BLOG July 27, 2012

THREE MCAD/MCAE RESULTS Q2 2012 COMMENTARY TBD

FOUR EDA RESULTS FOR Q2 2012 COMMENTARY TBD

Note the order of chapter posting dates may not be chronological. Indeed, CHAPTER TWO appeared weeks prior to CHAPTER ONE.


CHAPTER ONE



A Profile of Forte Design Systems

Foreword

As this issue goes to press, we are now in the ninth month of the third consecutive year in which the Contributing Editor has posted Feature Articles, Industry Commentaries, Quarterly Almanacs and yes, even Blogs, in the EDACafe.com daily Electronics newsletters.

Appearing every few weeks during the current year-to-date, topics chosen have ranged from detailed financial reports on the quarterly performances of selected public software vendors in Electronics Design Automation (EDA) and Mechanical Computer Aid Design and Mechanical Computer Aided Engineering (MCAD/MCAE), to profiles on people, vendors and products from both private and public sources.

Along with separate quarterly reports on financial results within the context of the then-current worldwide and national economies, emerging trends have been identified and explained, such as certain visionary vendors beginning to offer software tools in multiple technical disciplines toward the goal of correctly simulating real-world multi-physical effects, as well as reporting on the steady march of start ups, acquisitions, conferences, stockholder challenges and the rise of electronics intellectual property in these two disciplines.

Prior to the broader range of articles and topics presented during the last 38 or so months, the writer and certain colleagues at Henke Associates contributed six years (2003-2009) of quarterly reports focused solely on the financial results of certain EDA, Electronics IP and MCAD/MCAE Vendors.

Since January 2012

Extra spice was added during the last nine months by frequently inviting guest experts to contribute articles that would often cover areas related to disciplines in which the Contributing Editor alone may not be as well versed. Such articles have included a piece on the blurred line between EDA and electronics test equipment; the ways that the Silicon Valley lures people and companies from multiple worldwide locations and backgrounds; and many other similar topics.

We have been particularly delighted with the efforts of one Nanette V. Collins as a contributor to articles of increasing value to our readers. Nanette often tackles article topics on esoteric technologies developed by extremely smart people, and as the year has unfolded, frequently introduces EDA technology, talented entrepreneurs and remarkable theoreticians that the Contributing Editor alone might otherwise not often encounter, yet all are critical to the advancement of smaller and smaller, more complex circuitry and electronics products. We look forward to Nanette’s continued contributions.

New Article

Contributed by Ms. Nanette V. Collins

Edited by Dr. Russ Henke

Let’s start with a picture of a building that’s likely to appear familiar to a lot of readers – the front of the New York City Public Library.

« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise