Asia Pacific Market for Dental Prosthetics and CAD/CAM Devices - Japan, Australia, South Korea

NEW YORK, Sept. 3, 2012 — (PRNewswire) — Reportlinker.com announces that a new market research report is available in its catalogue:

Asia Pacific Market for Dental Prosthetics and CAD/CAM Devices - Japan, Australia, South Korea

http://www.reportlinker.com/p0962664/Asia-Pacific-Market-for-Dental-Prosthetics-and-CAD/CAM-Devices---Japan-Australia-South-Korea.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Dental_Equipment

The Asia-Pacific market includes Japan, South Korea and Australia. The aging population and demand for superior dental aesthetics will drive the dental prosthetics market over the 2011–2018 forecast period.

Australia has increasingly been affected by the outsourcing of dental prosthetics, while Japan continues to be affected by some level of economic uncertainty. However, the increasing penetration rate of CAD/CAM technology will offset each of these effects and increasingly drive the dental prosthetics market.

Report Includes:

Competitor Analysis: We provide a detailed analysis of the competative landscape including market shares and qualitative discussions of the leading and upcoming competitors in each market segment. Identify Strategic Opportunities, Customer Feedback and Market Monitoring, Market Overview by Segment & Country, Trend Analysis by Segment & Country, Market Drivers & Limiters, Mergers & Acqusitions.

Segments included:

TISSUE HEART VALVE,MECHANICAL HEART VALVE,ANNULOPLASTY REPAIR DEVICE,ON-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,OFF-PUMP CORONARY ARTERY BYPASS GRAFT DEVICE,ENDOSCOPIC VESSEL HARVESTING DEVICE,ANASTOMOSIS ASSIST DEVICE,CARDIAC ABLATION DEVICE,VENTRICULAR ASSIST DEVICE,INTRA-AORTIC BALLOON PUMP DEVICE, ARTIFICIAL HEART DEVICE, PFO AND ATRIAL AND SEPTAL DEFECT REPAIR DEVICE

EXECUTIVE SUMMARY1

1.1 ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS .1

1.2 CAD/CAM PROSTHETICS MARKET 2

1.3 CROWN AND BRIDGE MARKET3

1.4 DENTURE MARKET.4

1.5 CAD/CAM SYSTEM MARKET .5

1.6 FULL IN-LAB CAD/CAMSYSTEM MARKET.6

1.7 STANDALONE CAD/CAMSCANNER MARKET7

1.8 CHAIRSIDE SYSTEM MARKET8

1.9 COMPETITIVE ANALYSIS .9

RESEARCH METHODOLOGY.10

2.1 RESEARCH SCOPE .10

2.2 IDATA'S 9-STEP METHODOLOGY 10

Step 1: Project Initiation & Team Selection11

Step 2: Prepare Data Systems and Perform Secondary Research 13

Step 3: Preparation for Interviews & Questionnaire Design14

Step 4: Performing Primary Research 15

Step 5: Research Analysis: Establishing Baseline Estimates17

Step 6: Market Forecast and Analysis.18

Step 7: Identify Strategic Opportunities20

Step 8: Final Review and Market Release.21

Step 9: Customer Feedback and Market Monitoring 21

INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM DEVICES.22

3.1 INTRODUCTION .22

3.2 CROWNS AND BRIDGES .23

3.2.1 Crowns 23

3.2.2 Bridges 23

3.2.3 Material Types.23

3.3 INLAY/ONLAYS.24

3.3.1 Material Types.24

3.4 VENEERS.25

3.4.1 Material Types.25

3.5 DENTURES 25

3.5.1 Full Dentures.25

3.5.2 Partial Dentures26

3.6MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS 26

3.6.1 Conventional Fabrication 26

3.6.2 CAD/CAM Technology26

3.6.3 Rapid Prototyping 27

3.6.4 Intra-Oral Digital Impression-Taking27

3.7 CAD/CAM BLOCKS 28

ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET .29

4.1 INTRODUCTION .29

4.2 CURRENCY EXCHANGE RATE30

4.3MARKET ANALYSIS AND FORECAST .31

4.3.1 Dental Prosthetics 31

4.3.2 CAD/CAM Prosthetics Market.33

4.3.3 CAD/CAM System Market35

4.3.4 CAD/CAM Block Market37

4.4 TREND ANALYSIS BY SEGMENT 39

4.5MARKET DRIVERS AND LIMITERS .42

4.5.1 Market Drivers 42

4.5.2 Market Limiters .44

4.6MERGERS AND ACQUISITIONS.48

COUNTRY PROFILES.52

5.1 INTRODUCTION .52

5.1.1 Population .52

5.1.2 Median Age .52

5.1.3 GDP per Capita.52

5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants .52

5.1.5 Price Index 53

5.1.6 Asia-Pacific Dental Prosthetics per Capita Summary .53

5.2 JAPAN54

5.3 SOUTH KOREA 55

5.4 AUSTRALIA .56

5.5 DENTISTS PER POPULATION.57

JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 58

6.1 INTRODUCTION .58

6.2MARKET ANALYSIS AND FORECAST .60

6.2.1 Dental Prosthetic Device Market .60

6.2.2 Crown and Bridge Market62

6.2.2.1 Porcelain-Fused Metal (PFM) Device Market .66

6.2.2.2 Full-Cast Device Market .68

6.2.2.3 All-Ceramic Device Market.70

6.2.2.4 Hard-Resin Device Market72

6.2.3 CAD/CAM Prosthetics Market.74

6.2.3.1 Chairside CAD/CAM Prosthetics Market .76

6.2.3.2 In-Lab CAD/CAM Prosthetics Market 78

6.2.4 Denture Market .80

6.2.4.1 Full Denture Market82

6.2.4.2 Partial Denture Market .82

6.2.5 CAD/CAM System Market84

6.2.5.1 Full In-Lab CAD/CAM System Market .86

6.2.5.2 Standalone Scanner CAD/CAM System Market88

6.2.5.3 Chairside CAD/CAM System Market 90

6.2.6 CAD/CAM Block Market92

6.2.6.1 CAD/CAM Block Market by Material Type 94

6.3MARKET DRIVERS AND LIMITERS .98

6.3.1 Market Drivers 98

6.3.2 Market Limiters .100

6.4 COMPETITIVE ANALYSIS .104

6.4.1 CAD/CAM Prosthetics Market.104

6.4.2 CAD/CAM System Market106

SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 111

7.1 INTRODUCTION .111

7.2MARKET ANALYSIS AND FORECAST .112

7.2.1 Total Dental Prosthetics Market 112

7.2.2 Crown and Bridge Market114

7.2.2.1 Porcelain-Fused Metal Market .118

7.2.2.2 Full-Cast Market .120

7.2.2.3 All-Ceramic Market.122

7.2.3 CAD/CAM Prosthetics Market.124

7.2.3.1 Chairside CAD/CAM Prosthetics126

7.2.3.2 In-Lab CAD/CAM Prosthetics Market 128

7.2.4 Denture Market .130

7.2.4.1 Full Denture Market132

7.2.4.2 Partial Denture Market .132

7.2.5 CAD/CAM System Market134

7.2.5.1 Full In-Lab CAD/CAM System Market .136

7.2.5.2 Standalone Scanner CAD/CAM System Market138

7.2.5.3 Chairside CAD/CAM System Market 140

7.3 CAD/CAM BLOCK MARKET.142

7.3.1 CAD/CAM Block Market by Material Type .144

7.3.1.1 Zirconia 144

7.3.1.2 Porcelain 144

7.3.1.3 Acrylic 144

7.3.1.4 Metal.144

7.4MARKET DRIVERS AND LIMITERS .147

7.4.1 Market Drivers 147

7.4.2 Market Limiters .149

7.5 COMPETITIVE ANALYSIS .153

7.5.1 CAD/CAM Prosthetics Market 153

7.5.2 Total CAD/CAM System Market .156

AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET 161

8.1 INTRODUCTION .161

8.2MARKET ANALYSIS AND FORECAST .162

8.2.1 Dental Prosthetics Market162

8.2.2 Crown and Bridge Market164

8.2.2.1 Porcelain-Fused Metal Market .168

8.2.2.2 Full-Cast Market .170

8.2.2.3 All-Ceramic Device Market.172

8.2.3 CAD/CAM Prosthetics Market.174

8.2.3.1 Chairside CAD/CAM Prosthetics Market .176

8.2.3.2 In-Lab CAD/CAM Prosthetics Market 178

8.3 DENTURE MARKET.180

8.3.1.1 Full Denture Market182

8.3.1.2 Partial Denture Market .182

8.3.2 CAD/CAM System Market184

8.3.2.1 Full In-Lab CAD/CAM System Market .186

8.3.2.2 Standalone Scanner CAD/CAM System Market188

8.3.2.3 Chairside CAD/CAM System Market 190

8.4 CAD/CAM BLOCK MARKET.192

8.4.1 Market Overview 192

8.4.2 CAD/CAM Block Market by Material Type .194

8.4.2.1 Zirconia 194

1 | 2  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise