EDA Consortium Reports Revenue Increase for Q1 2012

SAN JOSE, Calif. — (BUSINESS WIRE) — July 11, 2012 — The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 6.3 percent for Q1 2012 to $1536.9 million, compared to $1446.4 million in Q1 2011. Sequential EDA revenue for Q1 2012 decreased 9.6 percent compared to Q4 2011, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 13.4 percent.

“First quarter 2012 results showed continued growth for the EDA industry,” said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. “Every major category except Services showed increased revenue, and every major region grew except Japan.”

Companies that were tracked employed 27,848 professionals in Q1 2012, an increase of 5.3 percent compared to the 26,457 people employed in Q1 2011, and up 0.8 percent compared to Q4 2011.

The complete MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available via subscription from the EDA Consortium.

Revenue by Product Category
The largest category, Computer Aided Engineering (CAE), generated revenue of $564.8 million in Q1 2012, which represents a 6.5 percent increase over Q1 2011. The four-quarters moving average for CAE increased 11.9 percent.

IC Physical Design & Verification revenue increased to $350.9 million in Q1 2012, a 10.2 percent increase compared to Q1 2011. The four-quarters moving average increased 15.7 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $147.5 million represents an increase of 5.1 percent compared to Q1 2011. The four-quarters moving average for PCB & MCM increased 3.9 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $391.3 million in Q1 2012, a 5.4 percent increase compared to Q1 2011. The four-quarters moving average increased 18.5 percent.

Services revenue was $82.4 million in Q1 2012, a decrease of 3.8 percent compared to Q1 2011. The four-quarters moving average increased 9.3 percent.

Revenue by Region
The Americas, EDA’s largest region, purchased $661.5 million of EDA products and services in Q1 2012, an increase of 9.8 percent compared to Q1 2011. The four-quarters moving average for the Americas increased 16.3 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) was up 8.2 percent in Q1 2012 compared to Q1 2011 on revenues of $261.7 million. The EMEA four-quarters moving average increased 10.9 percent.

First quarter 2012 revenue from Japan decreased 11.1 percent to $262.4 million compared to Q1 2011. The four-quarters moving average for Japan increased 0.2 percent.

The Asia/Pacific (APAC) region revenue increased to $351.3 million in Q1 2012, an increase of 14.4 percent compared to the first quarter in 2011. The four-quarters moving average increased 21.3 percent.

About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available by annual subscription. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium
The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the world’s electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets among others. For more information about the EDA Consortium, visit www.edac.org, or to subscribe to the Market Statistics Service, call 408-287-3322 or email Email Contact.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.


Press Contacts:
EDA Consortium
Paul Cohen, 978-769-2106
Mentor Graphics
Suzanne Graham, 503-685-7789

Review Article Be the first to review this article

Featured Video
System Designer/Engineer for Bluewater at Southfield, Michigan
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
4th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2018) at Movenpick Hotel Amsterdam City Centre Amsterdam Netherlands - Sep 19 - 21, 2018
Kenesto: 30 day trial
SolidCAM: Break the Chains

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise