IMTS – The International Manufacturing Technology Show 2012 Announces Rally Fighter Graphic CarSkin Competition

February 2, 2012 - McLean, Va. ... In preparation for the building of an automobile on the show floor at IMTS – The International Manufacturing Technology Show 2012, show management and Local Motors announce the Feb. 7 start of the IMTS 2012 Rally Fighter Graphic CarSkin Competition.  IMTS takes place Sept. 10-15 at Chicago’s McCormick Place and features the most advanced manufacturing technology in the world. 

To highlight the current and future impact of collaborative manufacturing, two Rally Fighters will be showcased at IMTS.  One will be built at the Local Motors micro-factory

in Chandler, Ariz., in March, where it will be wrapped in the winning Graphic CarSkin and will travel to various events on its way to IMTS in September.  The other will be built live by the Local Motors team on the actual IMTS show floor as part of the Emerging Technology Center (ETC).

The Rally Fighter is the world’s first open source production vehicle, designed and developed by a collaboration between a global community and Local Motors, a new American car company, at www.local-motors.com. This interactive manufacturing experience allows customers to actually build their own Rally Fighter with professional supervision.  The process is efficient and sustainable at 10x faster development and 100x less capital intensity than traditional models.

The winning skin from this competition will be installed on the Rally Fighter being built in March.  Another CarSkin competition in June will determine the skin for the IMTS Rally Fighter being built on the show floor in the ETC.

The competition information can be found at www.local-motors.com/imts or on IMTS.com/rallyfighter.  Entrants will have two weeks to submit their ideas.  Voting by the community for the top three designs will begin on Feb. 22, with the final design choice of those three being made by IMTS show management. The designer of the winning skin will receive $1,050 along with highlighted status on The Forge and exclusive Local Motors winners gear.  Designers can join the challenge by creating and entering a car graphic skin, or by collaborating with other designers via comments and votes.

“Collaborative manufacturing and disruptive technologies are shaping the future of manufacturing.  We want to give the IMTS community a taste of collaborative

 

manufacturing in anticipation of the show.  We’re encouraging everyone to get their illustration skills ready and join the competition’ says Peter Eelman, Vice President – Exhibitions & Communications for IMTS.  “We’re excited to start this process that will culminate with a round-the-clock build of the Rally Fighter during the six days of IMTS this fall.”

John “Jay” Rogers, Local Motors’ CEO says his company and IMTS have shared aim, “Local Motors is an open source community dedicated to learning and innovation; in this way, we’re quite aligned with IMTS.  We’re so excited to share a Rally Fighter build experience and this graphic skins challenge with both our community and the IMTS community.  Together we’ll create a Rally Fighter that is reflective of IMTS values and the current and future potential of collaborative manufacturing.  We invite everyone to join as a designer or collaborator!”

Start Date: Tuesday, February 7th (00:00 -8UTC)
Submission Deadline: Tuesday, February 21st (23:59, -8UTC)
Community Voting Period Start: Wednesday, February 22nd(00:00, -8UTC)
Community Voting Period End: Wednesday, February 29th (23:59, -8UTC)
Winner Announcement: Monday, March 5th (06:00 -8UTC)

 

To learn more about IMTS 2012, visit http://www.IMTS.com.

IMTS – International Manufacturing Technology Show

The largest and longest running manufacturing technology trade show in the United States is held every other year at McCormick Place in Chicago, Ill. IMTS 2012 will run September 10-15. IMTS is ranked among the largest trade shows in the world. Recognized as one of the world’s preeminent stages for introducing and selling manufacturing equipment and technology, IMTS attracts more than 82,000 visitors from every level of industry and over 119 countries. IMTS is owned and managed by AMT – The Association For Manufacturing Technology. www.IMTS.com

 

AMT – The Association For Manufacturing Technology

AMT - The Association For Manufacturing Technology (founded in 1902 as the National Machine Tool Builders' Association) supports and promotes the U.S. manufacturing technology industry. The association provides U.S. builders of manufacturing systems with the latest information on technical developments, trade and marketing opportunities, and economic issues. It also gathers and disseminates information about world markets, promotes its members' products in those markets, and acts as a representative on manufacturing technology matters to governments and trade organizations throughout the world. www.AMTonline.org 

 

Local Motors

Local Motors is a new American car company setting an exciting and sustainable course to design, manufacture, and sell cars for niche markets. Local Motors co-creates new purposeful vehicles and components with its community of 14,000 designers, engineers and enthusiasts using open source principals.  Anyone can join the Local Motors community at www.local-motors.com to assist in designing and engineering of new, innovative, vehicles, and anyone can help choose which vehicles are produced and [AF1]  available for purchase.  Local Motors shares all vehicle data to allow easier modification, home builds or creation of new components to fit existing vehicles.  Local Motors does not sell kits. Customers get to build their co-created vehicle at the Local-Motors Micro Factory with professional assistance.  The build is completed during 2, 3-day build weekends. Local Motors has been recognized for its groundbreaking approach to automotive development, appearing in articles in Popular Science, Wired and Popular Mechanics and was featured on the Discovery Channel. Now any individual, company or organization can co-create vehicles, parts and accessories through Local Motors’ co-creative challenge-based platform called “The Forge”; email support@local-motors.com for details.

 

# # #

 

Contact Mary Uhrina at Email Contact.

 





Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise