Camarillo, Calif. — Oct. 24, 2011 — Computer-aided-manufacturing (CAM) industry leader DP Technology, creator of ESPRIT®, will exhibit ESPRIT 2012, the latest version of its innovative software, at the Northern Alabama Industrial & Machine Tool Show, scheduled for Nov. 9-10 at the Von Braun Center in Huntsville, Ala.
Touted as a cost-effective vehicle for access to the latest and greatest technologies in the manufacturing industry, the Northern Alabama Industrial & Machine Tool Show is a hub for innovative software, machine tools, manufacturing equipment and more.
Visitors to the Northern Alabama Industrial & Machine Tool Show are encouraged to visit ESPRIT at booth No. 306B, where knowledgeable DP representatives will be available to discuss vital upgrades and perform demonstrations of how those upgrades can be put to work for you.
ESPRIT 2012 offers upgrades in all machining disciplines, with enhancements to turning, milling, mill-turn and wire EDM cycles.
For turning, the “park” cycle has been redesigned in ESPRIT 2012 to allow a machine tool’s head or turret to be parked. Increased versatility is achieved with the enhancement of allowing parking on each axis, which can be individually controlled using one of the four modes available — not parking the axis; moving the axis to home, as it would be set for a tool change; the tool moves to the input position in the operation coordinate system, or the axis moves to the input position in the machine-coordinate system.
For milling, ESPRIT 2012 offers an enhanced method of treating features used for contouring operations. Rather than allowing the tool to "roll" over the edge when at or near the starting depth, the feature edge can be extended to maintain the desired shape.
For wire EDM, new feature extension settings make it possible to extend the extremities of the feature so the wire path can start or end outside of the material when contouring or with EDM turning operations. This allows the wire path to be extended without actually modifying the feature. A new “dwell time” setting that inserts a dwell at the end of the rough cut to enlarge the exit point, ensuring that the wire for the skim cut can be re-threaded, has been added to all EDM contouring cycles.
ESPRIT is a high-performance computer-aided manufacturing (CAM) system for a full range of machine tool applications. ESPRIT delivers powerful full-spectrum programming for 2–5 axis milling, 2–22 axis turning, 2–5 axis wire EDM, multitasking mill-turn machining and B-axis machine tools, and high-speed 3- and 5-axis machining.
About DP Technology Corp.
DP Technology maintains its worldwide headquarters in Camarillo, Calif., and product development teams in California, Florence, Italy; and Berlin, Germany. Sales and support operations are located in Europe, Asia, and North and South America. For additional information about DP Technology and ESPRIT, call +1-805-388-6000, send an e-mail to firstname.lastname@example.org, or visit the company Web site at www.dptechnology.com.
Public Relations Coordinator