Moldex3D eXplorer 2011 for Solid Edge Officially Joined in Moldex3D’s Family Products

Hsinchu, Taiwan - August 17, 2011 - CoreTech System Co., Ltd. (Moldex3D), the True 3D CAE simulation solution provider, today announced the release of Moldex3D eXplorer 2011 for Solid Edge, the digital product design software from Siemens PLM Software. Moldex3D eXplorer is a quick part verification tool embedded in mainstream CAD software. It provides industrial designers an easier and efficient validation tool to check part quality and manufacturability when creating a CAD model. With its professional filling analysis capabilities, major molding problems, such as flow imbalance, air traps, weld lines, and design mistakes can be simulated and discovered in the early design phase, which enables users to save more time and efforts on modeling and designs. Moldex3D eXplorer 2011 supports Solid Edge ST3 and the latest release ST4. 

Features and Benefits

CAD Interoperability and High-Performance Solver

Moldex3D eXplorer for Solid Edge allows users to set up process conditions in their native design environment. Its automatic mesh generator will directly export CAD models into good-quality mesh and run a filling analysis. With the powerful support of parallel computing equipped up to 4 cores, the average analysis time is estimated to be less than 30 minutes. Users can verify design changes and different process conditions more efficiently.

                            

Simulations Enhance Design Quality

Moldex3D eXplorer for Solid Edge provides complete filling analysis results, including melt front time, pressure, melt front temperature, gate contribution, weld lines, air traps, etc. It helps users check gate locations and flow balance, prevent short shots and air traps, control weld line locations, and lower the effects of pressure loss and residual stress. Users also can optimize part thickness, minimize material cost, and reduce cycle time.

Higher User Friendliness, Better Work Environment

The user interface design in Moldex3D eXplorer for Solid Edge provides a simple and intuitive workflow. It reduces learning time and enhances user innovation. It also supports automatic HTML report generation, which enables users to present the performance of product designs with their executives, colleagues, and customers.

For detailed product information and pricing, please contact our local offices or resellers. Further technical information also can be found at www.moldex3d.com.

About CoreTech System Co., Ltd. (Moldex3D)

CoreTech System Co., Ltd. (Moldex3D) has been providing the professional CAE analysis solution “Moldex” series for the plastic injection molding industry since 1995, and the current product “Moldex3D” is marketed worldwide. Committed to provide the advanced technologies and solutions for industrial demands, CoreTech has extended the worldwide sales and service network to provide local, immediate and professional service. Nowadays, CoreTech presents the innovation technology, which helps customers troubleshoot from product design to development, optimize design patterns, shorten time-to-market, and maximize product ROI.

About Siemens PLM Software

Siemens PLM Software, a business unit of the Siemens Industry Automation Division, is a leading global provider of product lifecycle management (PLM) software and services with 6.7 million licensed seats and more than 69,500 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with companies to deliver open solutions that help them turn more ideas into successful products. For more information on Siemens PLM Software products and services, visit www.siemens.com/plm.

 

Email Contact



Read the complete story ...


Review Article Be the first to review this article
Rand3D

Featured Video
Jobs
Mechanical Engineer I for Air Techniques, Inc at Melville, NY
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
The Rise of Mechatronics at Dassault Systèmes Santa Clara 3979 Freedom Circle, Ste 750 Santa Clara CA - Sep 14, 2017
The 30th Annual Integrated Process Excellence Symposium & Training at Wyndham Grand Bonnet Creek Resort Orlando FL - Sep 18 - 20, 2017
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise