Northwest Logic and Avery Design Systems Successfully Team on PCI Express 3.0 Solutions

ANDOVER, MA., August 8, 2011 – Northwest Logic Inc., a leader in high-performance digital IP Cores, and Avery Design Systems, a leader in Verification IP (VIP) solutions, today announced Northwest Logic’s Expresso 3.0 solutions for PCI Express® (PCIe®) for Endpoint, Root Complex, and Switch have been fully verified and deployed to customers based on Avery’s PCI-Xactor verification models and compliance testsuites.

"We use Avery's PCI-Xactor Verification IP to comprehensively verify our PCI Express products.," said Brian Daellenbach, president of Northwest Logic.  “Avery’s VIP models and compliance testsuites have been proven to provide the broad range of testing needed to fully verify PCI Express operation.  In addition, Avery’s support has been technically outstanding and very timely.  Avery is more than a vendor to us, they are a key partner who supports us and our customer’s PCI Express verification needs. We recommend Avery to all our customers for robust SoC verification."

Avery’s PCI-Xactor is a complete functional verification solution for PCI Express 3.0/2.1/1.1 including feature rich models that work in any verification languages including SystemVerilog OVM and VMM methodologies, comprehensive protocol checking, functional coverage monitoring, and dedicated core and chip-level compliance test suites for Root Complex, Endpoint, SR-IOV Endpoint, Switch, and PHY designs.

"Starting a design with an IP Core that has been fully verified enables customers to achieve the shortest possible design cycles and achieve first time silicon success.  Northwest Logic provides high-performance, silicon-proven complete solutions for chip designs that enable just that.” said Chris Browy, Vice President of Avery Design Systems.  “Our partnership with Northwest Logic has proven the exceptional quality and integrity of the IPs that is being produced by Northwest Logic.”

Northwest Logic provides a complete PCI Express Solution.  This solution includes Northwest Logic’s high-performance, easy-to-use, silicon-proven Expresso 3.0/2.1/1.1 Cores for PCI Express, DMA Back-End Core which provides high-performance scatter-gather DMA engines, Drivers (Linux & Windows) and Application software.  For a complete system design Northwest Logic optionally provides its high-performance DDR3/DDR2/DDR SDRAM Controller Cores and add‐on cores (AXI/AHB, Multi‐Port, Reorder,etc.).  These solutions are available separately or as a single, fully integrated solution.

About Avery Design Systems

Founded in 1999, Avery Design Systems, Inc. enables system and SOC design teams to achieve dramatic functional verification productivity improvements through Insight formal analysis for improved functional verification and DFT closure, robust core-through-chip-level Verification IP for PCI Express, USB, xHCI, UAS/BOT, AXI3/4, and AHB standards, and scalable distributed parallel logic simulation.  The company is a member of the Synopsys SystemVerilog and VMM Catalyst Programs, Mentor Graphics Modelsim Value Added Partnership (VAP) program, and has established numerous Avery Design VIP partner program affiliations with leading IP suppliers. More information about the company may be found at www.avery-design.com.

About Northwest Logic

Northwest Logic, founded in 1995 and located in Beaverton, Oregon, provides high-performance, silicon-proven, easy-to-use IP cores including high-performance Expresso Solution (PCI Express 3.0, 2.1 and 1.1 cores and drivers), Memory Interface

Solution (DDR3, DDR2, DDR, Mobile DDR SDRAM; RLDRAM II), and MIPI Solution (CSI-2, DSI).  These solutions support a full range of platforms including ASICs, Structured ASICs and FPGAs.  For additional information, visit www.nwlogic.com

or contact Email Contact.

Avery Design Systems Contact:                                                Northwest Logic Contact

Chris Browy                                                                             Vinitha Seevaratnam

Avery Design Systems                                                            Northwest Logic, Inc.

Tel: 978-689-7286                                                                   Tel: 503-533-5800 x308

Email Contact                                                      Email Contact




Review Article Be the first to review this article
Rand3D

Featured Video
Jobs
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
SolidCAM: SolidCAM Dec 2017 Campaign Save 28 percent



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise