Mentor Graphics Completes 28nm Physical Design and Verification Flow for GLOBALFOUNDRIES Technology

WILSONVILLE, Ore. — (BUSINESS WIRE) — June 3, 2011Mentor Graphics Corporation (NASDAQ: MENT) today announced it has completed its 28nm signoff-ready digital design flow for GLOBALFOUNDRIES technology. The sign-off-ready design flow is precisely tuned to address the unique challenges of designing and manufacturing integrated circuits at leading-edge nodes. The Olympus-SoCplace and route system includes expanded low-power features, improved recipes for efficient routing at 28nm, and DFM support for the foundry’s manufacturing scoring analysis (MAS) technique. The Calibre® platform provides advanced pattern matching technology that implements GLOBALFOUNDRIES’ DRC+ methodology for elimination of litho hotspots. The Calibre InRoute™ solution provides the Calibre signoff analysis and automated repair integrated in the Olympus-SoC physical design system.

“GLOBALFOUNDRIES’ 28nm technology and methodologies tuned with Mentor’s tools offer our customers a powerful solution to drive better yield and faster time to market,” said Andy Brotman, vice president of design infrastructure at GLOBALFOUNDRIES. “These advanced solutions—especially with the integration of our DRC+ pattern-matching technology—help ensure that designs using our 28nm technologies perform and yield well without lengthy delays in the design cycle to achieve manufacturing closure.”

Mentor® provides a complete reference flow based on the Olympus-SoC place and route system and the Calibre physical verification and DFM platform. New capabilities in the Olympus-SoC product make it ready for GLOBALFOUNDRIES’ most advanced processes including improved recipes for efficient routing with support for advanced 28nm ground rules to implement DFM, support for manufacturing scoring analysis (MAS), stage-based on-chip variation (OCV) tables for clock and data paths, and context-dependent timing, power and placement. In addition, the Olympus-SoC product supports low power design with UPF-based IP models, advanced nested voltage islands (donut shapes), and multi-vendor UPF interoperability.

The Mentor reference flow fully supports GLOBALFOUNDRIES’ DRC+ methodology, which leverages the signoff-quality pattern matching technology in the Calibre platform to deliver advanced litho checking that is over 100 times faster than traditional flows. The flow also includes the Calibre InRoute manufacturing closure platform, which enables designers to natively invoke Calibre tools within the Olympus-SoC place and route system to achieve true manufacturing closure during physical design. The Calibre InRoute platform provides customers with GLOBALFOUNDRIES-certified DRC+ fixing, which implements true correct-by-construction design by recognizing and eliminating restricted layout patterns that can cause DRC/DFM violations.

Also in the area of DFM, GLOBALFOUNDRIES has released its Manufacturing Analysis and Scoring (MAS) deck for the Calibre platform. MAS is a third-generation deck designed to bridge the gap between DFM rules and models. It uses the unique Calibre equation-based DRC (eqDRC) capability to score the manufacturability of a layout using an easy-to-understand metric. Using MAS, companies can provide DFM guidelines with a go/no go cut line to their designers and IP providers, helping to reduce manufacturability surprises at final tape out.

"The integration of Olympus, Calibre and GLOBALFOUNDRIES technology into a seamless flow, including optimization for advanced DFM effects, helps ensure signoff-ready results without the iterations and rework often required to achieve manufacturing closure," said Joseph Sawicki, vice president and general manager of Mentor's Design-to-Silicon Division. “The Mentor reference flow helps mutual customers fully leverage 28nm process capabilities, yet still maintain or reduce design cycle times."

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues over the last 12 months of about $915 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site:

(Mentor, Mentor Graphics and Calibre are registered trademarks and Olympus-SoC and InRoute are trademarks of Mentor Graphics Corporation. All other company and/or product names are the trademarks and/or registered trademarks of their respective owners).


Mentor Graphics
Gene Forte, 503-685-1193
Email Contact
Sonia Harrison, 503-685-1165
Email Contact

Review Article Be the first to review this article


Featured Video
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
System Designer/Engineer for Bluewater at Southfield, MI
Director of Process Engineering. for Tekni-Plex at Toledo, OH
Senior Structural Engineer for Wiss,Janney, Estner Assoicates, Inc at houston, TX
Avionics System Engineer for BAE Systems Intelligence & Security at Arlington, VA
Upcoming Events
Formlabs LA 3D Printing Roadshow at Munky King Lost Angeles CA - Feb 8 - 9, 2018
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise