Tenneco’s European R&D center counts on the LMS SCADAS durability solution for exhaust system testing

Flexible and efficient solution guarantees more than 25 successful campaigns annually

Tenneco, a global supplier of emission control solutions, recently acquired two LMS SCADAS Durability Recorders for the Road Load Data Acquisition (RLDA) team located in Edenkoben, Germany. This team performs more than 25 exhaust system durability campaigns annually to guarantee a product lifetime of more than 10 years and simultaneously meet tighter-and-tighter emission regulations.

“After a thorough benchmark, we selected the LMS SCADAS Durability Recorder. The LMS solution really offers the best price-quality ratio of all the solutions we examined. We particularly valued the compact size and the robustness of the system, the flexibility to connect a broad range of sensors and the software’s ease-of-use for test preparation and validation,” explained Mr. Klaus Rieger, RLDA engineer at Tenneco.

A typical durability test starts with the customer’s vehicle prototype being instrumented inside Tenneco’s facilities. Part of this process is mounting the LMS SCADAS Durability Recorder. In parallel, the team prepares the test itself. Thanks to the easy-to-use LMS Test.Xpress software, they experienced a concrete time gain during the test set-up. With the previous software, it took 4 hours. With the LMS solution, it is less than 45 minutes.

The next step takes place on the proving ground where data acquisition reliability really matters. All the essential data is acquired with 144 channels split between the two LMS SCADAS units. During this stage, an important feature for Tenneco is the GPS functionality. The GPS signal helps retrace information in case a marker is missing and lets the engineer know where a specific event took place.

“I am certain of my measurements since I know that the test run has been marked with GPS data,” clarified Mr. Rieger. “We have only a very short time to measure our data. We need to validate the data on the spot. With real-time signal calibration and quality checks, like the one-button LMS SCADAS Smart Control, I can concentrate on the measurement and not bother about anything else. It makes testing quite a lot of fun.”           

“With such a flexible and efficient solution, our RLDA team can guarantee quality test results for every single one of our more than 25 campaigns annually. When we opted for LMS, we clearly did not only purchase a data acquisition system, we acquired the right tool for our job. This is why partnering with LMS is the correct choice for us,” concluded Dr. Wang, RLDA Group leader at Tenneco.

About Tenneco

Tenneco is a $5.9 billion global manufacturing company based in Lake Forest, Illinois with 21,000 employees worldwide. It is one of the world's leading designers, manufacturers and distributors of automotive emission control and ride control systems and products for the automotive original equipment market and aftermarket.

About LMS International


LMS, the leading partner in test and mechatronic simulation in the automotive, aero- space and other advanced manufacturing industries, helps customers get better products to market faster. With a unique combination of mechatronic simulation software, testing systems and engineering services, LMS tunes into mission critical engineering attributes, ranging from system dynamics, structural integrity and sound quality to durability, safety and power consumption. With multi-domain and mechatronic simulation solutions, LMS addresses complex engineering challenges associated with intelligent system design and model-based systems engineering. More than 900 LMS professionals serve over 5,000 manufacturing companies worldwide.

 



Read the complete story ...


Review Article Be the first to review this article
HP

Autodesk - DelCAM

Featured Video
Jobs
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
Lead Geospatial Analyst for Alion at McLean, VA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise