Intergraph CADWorx Webinar Highlighting New Routing and Self-Aware Component Capabilities in CADWorx 2011

HOUSTON, TX -- (MARKET WIRE) -- Jul 19, 2010 -- Intergraph has scheduled a webinar on July 27, 2010, at 12:00 noon CDT that will include an introduction to the upcoming release of CADWorx 2011 Intergraph's AutoCAD®-based plant design solution. The presentation will include demonstrations of new pipe routing capabilities and using the new self-aware component feature to quickly add branches as you route your lines. The webinar will also include a discussion on how inline components and sub-assemblies are now associated. Sonia Delgadillo, senior applications specialist for CADWorx solutions at Intergraph CADWorx and Analysis Solutions group, will lead the webinar.

For information on this webinar, visit http://coade.typepad.com/coadeinsider/2010/07/intergraph-cadworx-webinar-cadworx-2011-ng-sneak-peak-routing-july-27-2010.html.

A webinar registration form is at https://www1.gotomeeting.com/register/405049713. For more information about Intergraph CADWorx Plant solutions, visit www.coade.com.

About Intergraph CADWorx & Analysis Solutions
With the January 2010 acquisition of COADE, Inc., Intergraph has extended its offerings with plant design solutions for AutoCAD®-based projects and design groups and for the broader engineering community. The aims of the Intergraph CADWorx and Analysis Solutions group are that design and engineering share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. These products continue to conform to those goals and include: CADWorx Plant Design Suite for intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for pressure vessel and heat exchanger design and analysis; and TANK for the design and analysis of oil storage tanks. For information on the acquisition, visit http://www.intergraph.com/ppm/coade.aspx.

Intergraph, the Intergraph logo, CADWorx and CAESAR II are registered trademarks, and PV Elite, and TANK are trademarks of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2010 Intergraph Corp. All rights reserved.

Intergraph CADWorx & Analysis Solutions, 12777 Jones Rd., Suite 480, Houston, Texas 77070 USA; Tel: +1.281.890.4566, Web: www.coade.com

Contacts
Gary Carson
+1.713.668.8550

Email Contact 
Vornel Walker
+1.281.890.4566 





Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise