Shop floor programming with WorkNC CAM software at Patterson Mold & Tool boosts productivity (SESCOI)

June 29, 2010 - The six seats of WorkNC CAM software that Patterson Mold & Tool, uses on its shop floor have improved productivity by 30%. The company, based in St Charles, Missouri, U.S. has been producing tooling for the die cast industry for over 30 years and is now part of Pace Industries, one of the largest die casting companies in the world. The main markets for its products are tools for its parent company used in the domestic appliance, lawn and garden, electrical, small motor, lighting, and telecommunications sectors. It now also produces parts for the aerospace industry, machining components such as pylons and struts, supported by AS9100 and ISO 9001 quality certification.

Before installing WorkNC, Patterson Mold & Tool had six full time CNC programmers, so machinists were relying on their skill, and had to wait when any changes had to be made to the CNC program. Roy Thomas, CNC Supervisor, says, " The machine operators had little idea of the machining methods chosen for them, which resulted in cautious feeds and speeds being used in the interests of safety." By installing WorkNC, the company has been able to redeploy the programmers to other engineering roles and carry out all its CNC programming on the shop floor. One lead programmer provides in house training and administers the WorkNC system so that the 10 machine operators can program their machines themselves.

Roy Thomas adds, “ The operators understand their tooling, machines and the metal cutting process significantly better than our offline programmers did. Productivity has gone up by 30% with better toolpaths and much less time wasted making changes. In particular, roughing operations take half the time to program and run 70% faster.”

As well as its 15 CNC machines, Patterson Mold & Tool has two 5-axis CNC machining centers, a DMG DMU 80 P and a DMG DMU 100 P. These machines were installed to reduce the number of EDM tools required for each job by making it possible to machine more of the tool directly. Now that the company is making aerospace parts, these machines have become an essential part of its production capability.

Roy Thomas says, “ We use WorkNC’s Auto 5 module exclusively for our 5-axis CNC programming and we have found it so easy to use that we did not need any training. Now around 25% of our work requires 5-axis machining and our 10 machinists use it every day.” WorkNC Auto 5 changes 3-axis toolpaths into 5-axis toolpaths automatically. Collision avoidance takes account of the tool and its holder as well as the limitations of the machine itself. Algorithms in the CAM software ensure you can utilize the shortest tool lengths and also intelligently use the machine axis limits data to introduce unwind and flip movements automatically.

Patterson Mold & Tool uses Unigraphics, CATIA and Pro/Engineer for its design, so tooling and aerospace models are all manipulated in these CAD systems prior to manufacture. The designers set the origins and put the parts in the right orientation ready for the machine operators to apply the toolpaths. Data goes straight into WorkNC, and pre defined macros automatically speed up the programming process. The company operates a three shift system, with low personnel levels on two of them, and depends heavily on the reliability of the software’s toolpaths, as parts can take up to 65 hours to machine. Roy Thomas says, “ The quality of WorkNC’s toolpaths are excellent. The Spiral Core Roughing is extremely good and gives us a great improvement in tool life.

The six floating licenses of WorkNC give the company flexibility, enabling the majority of the operators to be programming simultaneously while keeping capital investment to a minimum. Roy Thomas adds, “ WorkNC is extremely important to us, and has resulted in some major improvements to our productivity, thanks to its automated cycles, reliability and ease of use. It is our only way of programming 5-axis parts, which is a large part of our business, helping us to reduce the number of set ups and fixtures we require and enabling us to cut more of the part in one hit.

A .doc version and image can be downloaded on

Please do not hesitate to contact us should you require further information.

Email Contact

Review Article Be the first to review this article

Featured Video
Pilot for Geomni, Inc at Lehi, Utah
Management Analys for City of Lenexa at Lenexa, Kansas
Information Technologist II for Michigan State University at East Lansing, Michigan
GIS Analyst for Institute for Children and Poverty at New York, California
Upcoming Events
COMSOL Conference 2018 Boston at Boston Marriott Newton 2345 Commonwealth Avenue Newton MA - Oct 3 - 5, 2018
34th International CAE Conference and Exhibition 2018 at Vicenza Convention Centre @ Fiera di Vicenza Vicenza Italy - Oct 8 - 9, 2018
3D Collaboration & Interoperability Congress at Golder CO - Oct 15 - 18, 2018
2018 Simcenter Conference - Americas at Crowne Plaza Detroit Downtown Riverfront Detroit MI - Oct 15 - 17, 2018
SolidCAM: See It Live

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise