SolidWorks User Wins Popular Science Invention Award

‘RAD’ Design Delivers Higher Snow Machine Performance

CONCORD, Mass. — (BUSINESS WIRE) — June 28, 2010 — Toronto snowmobile racer Shawn Watling was using cardboard, string, and stacks of paper to dial in his invention when a professional engineer buddy turned him on to SolidWorks® software. Since then, Watling has tripled his work speed and won the Popular Science Invention Award for a device that could turn his sport on its head.

Watling has designed a breakthrough snowmobile track powered by a rearward axle instead of the traditional one in the front of the sled. Third-party tests show that when compared with traditional designs, Watling’s Rear Axle Drive (RAD) technology delivers:

  • 30 percent more power to the ground than a traditional design, meaning faster acceleration;
  • A 10 percent increase in top speed;
  • A 33 percent reduction in stopping distance;
  • Superior cruising and cornering; and
  • Up to 72 percent increase in fuel economy.

The former provincial hockey star and millwright is now in talks with several household-name snowmobile makers considering acquiring the patent-pending technology.

Watling modeled his current prototype machine in SolidWorks software – the whole sled – down to every screw and washer. He uses SolidWorks Simulation software for stress and motion analysis, and to cut excess weight from the design. He exchanges DXF files with machinists for water and laser cutting.

“I went through all the things a snow machine does and charted all the physics,” says Watling. “SolidWorks lets me try multiple scenarios using all types of geometry without having to make a physical prototype every time. For example, I rattled off eight quick swingarm designs in a couple of days and used SolidWorks Simulation to measure the ground forces, which is a critical factor in this design. I designed my latest sled prototype in four months with SolidWorks, avoiding three or four physical prototypes and probably a year and a half of labor.”

By moving a snowmobile’s propulsion axle from the front to the back of the sled, RAD drives power directly to the ground. This is the key to making the sled “carve like a snowboard, climb like a scared cat, launch like a dragster, crank in the corners, and stop like you snagged a fence,” according to Watling. The design further conserves energy by adding an extra 14 inches to the front track position and spending less effort pulling the track around the idler wheel.

Videos on Watling’s website show how RAD puts pressure on the skis when you want it (e.g., during acceleration) and lightens the pressure when you’re cruising to avoid the dangerous process of darting in and out of other riders’ grooves. Better weight distribution also minimizes sliding during braking and is crucial in fuel economy. To further demonstrate superior performance, Watling is installing RAD on racing sleds that will generate 500 hp and attempt the Guinness world record for the snow machine asphalt quarter-mile later this year. He’s also shooting for the vaunted Ice Oval record at Eagle River, Wisc. It has stood for 20 years.

“I’m just so much faster, more organized, and more productive with SolidWorks,” Watling says. “Without it, I wouldn’t have advanced the design to this stage, much less be on the way to taking it to the next level.”

Watling relies on authorized SolidWorks reseller Javelin Technologies for ongoing software training, implementation, and support.

About Dassault Systèmes SolidWorks Corp.

Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. subsidiary, is a world leader in 3D solutions that help millions of engineers and designers succeed through innovation. Our products deliver an intuitive experience in product design, simulation, publishing, data management, and environmental impact assessment. For the latest news, information, or an online demonstration, visit our Web site ( or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks, 3D ContentCentral, and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other brand and product names are trademarks of their respective owners. © 2010 Dassault Systèmes SolidWorks Corp.


Dassault Systèmes SolidWorks Corp.
Nancy Buchino, 978-318-5262
Email Contact
Beaupre & Co. Public Relations
Darby Johnson, 603-559-5809
Email Contact

Review Article Be the first to review this article

Featured Video
Body Structure Engineer (Entry Level) for HATCI at Superior Twp, California
GIS Specialist for Olsson Technology at Overland park, Kansas
GIS Specialist for ERDMAN at Madison, Wisconsin
Upcoming Events
Scilab Conference at Mozilla Paris 16 Bis Boulevard Montmartre Paris France - Nov 20, 2018
PI Marine 2018 at Hamburg Germany - Nov 27 - 28, 2018
2018 Simcenter Conference - Europe at Hilton Prague Pobrezni 1 Prague Czech Republic - Dec 3 - 5, 2018
Inside 3D Printing Mumbai 2018 at Nehru Centre Mumbai India - Dec 19 - 20, 2018
Kenesto: 30 day trial
SolidCAM: See It Live

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise