Delcam: June Issue 46b

 

 
News.Delcam
 

Welcome to News.Delcam - Issue 46b

In this Issue...

More efficient machining
New scanner for orthotics
Delcam offers more accurate dental CADCAM
Cimarron diversifies with Delcam
Reverse Engineering with CopyCAD Pro
From hand carving to CNC

MORE EFFICIENT MACHINING

MORE EFFICIENT MACHINING
Kobe Aluminum Automotive Products LLC (KAAP) has been able to reduce machining times and reduce hand finishing by switching to PowerMILL. The change produced savings both during programming and on the machine; the software that the company had been using was difficult to learn and produced programs that took too long to run.
Read More >>

NEW SCANNER FOR ORTHOTICS

Delcam has launched the iQube, a dedicated 3D scanner to capture data for the design of orthotics. Delcam already supplies OrthoModel and OrthoMill, the industry-leading software for the design and manufacture of orthotics for either diabetic or rheumatoid patients, or for the correction of abnormalities caused by a biomechanical miss-alignment of the musco-skeletal system.
Read More >>
NEW SCANNER FOR ORTHOTICS

DELCAM OFFERS MORE ACCURATE DENTAL CADCAM

Delcam has released new versions of its DentCAD and DentMILL software for the design and manufacture of dental restorations. The company believes that these latest programs offer higher levels of consistency and accuracy than other dental CADCAM systems. As a result, they can minimise, or even eliminate, manual adjustment of the restoration as it is being fitted, and produce restorations that give improved comfort and that are more durable.
Read More >>
DELCAM OFFERS MORE ACCURATE DENTAL CADCAM

CIMARRON DIVERSIFIES WITH DELCAM

Adding design and machining software from Delcam has enabled Cimarron Lofting to open up entire lines of products that the company could not make easily before, including cabinet parts, vent covers, grills, electrical cover plates, front-door panels and more. This diversification has helped owner, Bill Amaya, to stay afloat in these economically challenging times.
Read More >>
CIMARRON DIVERSIFIES WITH DELCAM

REVERSE ENGINEERING WITH COPYCAD PRO

Delcam has released the 2010 version of its CopyCAD reverse engineering software, the first to incorporate Parasolid® software, the industry’s leading 3D geometric modelling component from Siemens PLM Software. The new release also includes new algorithms for surface creation with boundaries or with drive curves, plus new methods to use the software for the inspection of complex parts.
Read More >>
REVERSE ENGINEERING WITH COPYCAD PRO

FROM HAND CARVING TO CNC

Paul Seddon, owner and founder of Northmeade CNC, has used ArtCAM to transfer his hand-carving skills seamlessly into CNC programming. His company provides a confidential, freelance ArtCAM programming service that specialises in embossing dies and hot-foiling dies for the greetings-card and packaging industries.
Read More >>
FROM  HAND  CARVING  TO  CNC

New DelcamTV videos

Delcam  TV  Videos
New Features in PowerMILL 2010
Robinson Helicopters - FeatureCAM Customer Testimonial
Eifel - PowerMILL Customer Testimonial
Fischer Tool & Die - Energy Industry Testimonial
view more videos ...



Main Events

Events
FARNBOROUGH AIR SHOW
19th - 25th July
Farnborough, UK
IMTS
13th - 18th September
Chicago, USA
BIMU SFORTEC
5th - 8th October
Milan, ITALY
view all events...



Free Downloads

Free  Downloads
Exchange
FeatureCAM
PowerSHAPE-e
Designer-e (for ArtCAM Users)
ArtCAM Insignia
ArtCAM Express



Forums

Forums
Delcam
FeatureCAM
ArtCAM


Visit our Industry
Websites

View  our  Industry  Websites
Aerospace
Automotive
Ceramics
Composites
Dental
Footwear
Healthcare/Medical
Inspection
Marine
Machining
Medical Implants
Mould Making
Orthopaedic
Orthotics
Packaging
Plastics
Product Design
Rapid Prototyping
Reverse Engineering
Tool Making
Toys
Tyres
more.. .
  © Copyright Delcam plc 2010. All rights reserved   www.delcam.com  


Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise