ABSi Plastic Available For FDM Rapid Prototyping

To download high-resolution,
print-ready JPEG images,
click on the thumbnail image above.
WARNING: these images are
very large (800K+)
Click here for caption
Smart News Release Help

NOTE TO MEDIA: Multimedia assets available

A photo is available at URL:

http://www.businesswire.com/cgi-bin/photo.cgi?pw.063003/bb1


MINNEAPOLIS--(BUSINESS WIRE)--June 30, 2003--(Nasdaq: SSYS) Rapid prototyping systems maker, Stratasys, announced it has released ABSi plastic for use with its FDM Maxum.(TM) ABSi is expected to be used by automotive industry product designers, among others.

ABSi is available as a colorless plastic and also comes in translucent red, amber, or white. The plastic can be sterilized via gamma radiation and ethylene oxide (EtO) sterilization. ABSi is compatible with the soluble support product, WaterWorks,(TM) which saves time by dissolving model supports rather than requiring manual removal. ABSi has been available previously for some FDM systems.

In automotive applications, engineers have a frequent need to test prototypes such as tail lamps and other components that allow light transmission. FDM Maxum users are now able to perform such aesthetic tests with large, functional models. The Maxum is Stratasys' fastest machine with one of the industry's largest build envelopes.

Existing Maxum users will need to install the latest version of Stratasys Insight(TM) software (version 3.5 or later); no new hardware is needed. Users with service contracts will automatically receive the software version; those without a service contract should contact their local sales representative. Upgrading to ABSi and switching between materials are both simple steps, performed by the operator. ABSi-ready Maxums are currently shipping.

FDM models will not warp, shrink, or absorb moisture. Like all Stratasys equipment, the FDM Maxum requires no special facilities or venting and involves no hazardous materials or by-products. Stratasys systems typically represent the lowest total-cost-of-ownership among the major rapid prototyping suppliers.

Stratasys Inc, Minneapolis, manufactured 31% of all rapid prototyping systems installed worldwide last year: the highest percentage of any manufacturer, according to Wohlers Report 2003. The company patented the rapid prototyping process known as fused deposition modeling (FDM(R)). The process creates solid models directly from 3D CAD files using ABS plastic, polycarbonate, PPSF or other materials. Stratasys manufactures rapid prototyping systems for OEMs such as aerospace, automotive, defense, consumer, and medical product makers.

FDM Maxum, WaterWorks, and Insight are trademarks of, and FDM and Stratasys are registered trademarks of, Stratasys Inc.

This news release contains forward-looking statements that involve risks and uncertainties. Introduction of new products and materials are subject to timely completion of development and timely manufacture, and the success of new products is subject to their operation in the field as well as customer acceptance. Other risks are detailed from time to time in the Company's SEC Reports, including the report on Form 10-Q for March 31, 2003 and Form 10-K for the year ended December 31, 2002.

Attention editors: The contact at the bottom of this release is an editorial contact only. If you wish to publish reader-contact information, please use: Toni Brown, Email Contact, ph: 952.937.3000, toll-free: 1.888.480.3548, www.stratasys.com.

Note: A photo is available at URL:

http://www.businesswire.com/cgi-bin/photo.cgi?pw.063003/bb1

CONTACT: Stratasys Inc, Minneapolis
             Joe Hiemenz, 952/937-3000  x-726
             
Email Contact
             
www.stratasys.com

Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise