Finals Judging Begins for EcoCAR Teams at GM Desert Proving Ground in Yuma

Engineering Students Show-off Vehicles, Undergo Rigorous Testing and Inspections to Decide Year Two Winners

YUMA, Ariz., May 19 — (PRNewswire) — The Green Garages are empty. 16 vehicles sit in the Arizona desert. And more than 100 college engineering students wait to show a panel of judges that their vehicle should win top honors. As the end of Year Two approaches in EcoCAR: The NeXt Challenge, today inspections, testing and judging got underway at the General Motors (GM) Desert Proving Ground in Yuma, Arizona.

To view the multimedia assets associated with this release, please click: http://multivu.prnewswire.com/mnr/ecocar/44248/

For the next six days, the 16 EcoCAR teams from universities across North America will test their vehicle's strength in a series of pit tests that range from braking to drive quality to lane changing. From sunrise to sundown, the teams will cycle their vehicles through multiple testing sessions, refining and working on their cars in the pits between judging.

"The students spent two years designing and building these innovative vehicles and it's thrilling to see them come to life here at our Desert Proving Ground," said John Haraf, director of Hybrid Vehicle Integration and Controls for General Motors. "We couldn't imagine a more appropriate place to conclude Year Two of the EcoCAR competition – these young engineers must pass the toughest inspections and undergo the same tests we perform on our own prototypes. This challenging process gives them invaluable experience and preparation for careers in the industry."

EcoCAR is a three-year competition sponsored by the U.S. Department of Energy and General Motors that challenges each team to re-engineer a GM-donated vehicle using a range of alternative technologies and integrating them together to make their own unique architecture. The EcoCAR vehicles fall into one of the following four categories: extended-range electric vehicle (EREV), plug-in hybrid electric vehicle (PHEV), fuel cell plug-in hybrid electric vehicle and full function electric vehicle. While each one is different, they must all minimize fuel consumption, petroleum use and emissions, and meet commercial standards for utility, safety and performance.

All tests will be conducted at GM's 2,400-acre Desert Proving Ground which includes 40 miles of roads located on the US Army military proving ground and artillery range. The facility's low humidity and rainfall conditions make it an ideal location for automotive testing. This week will be the first opportunity for members of national and regional media to visit and tour the Desert Proving Ground which opened in July 2009.

Following this week's testing and judging in Yuma, the teams will move to San Diego, CA where the Year Two competition winners will be announced on Thursday, May 27 at the San Diego House of Blues.

To keep up with teams in Yuma and San Diego, please check the Inside the Green Garage blog daily for updates, photos and video from Finals. Be sure to look out for our testing time lapse from the Desert Proving Ground too! Additional information about the EcoCAR program can be found on at www.ecocarchallenge.org.

About EcoCAR

EcoCAR is a three-year competition that builds on the 20-year history of U.S. Department of Energy advanced vehicle technology competitions by giving engineering students the chance to design and build advanced vehicles that demonstrate leading-edge automotive technologies. General Motors provides production vehicles, vehicle components, seed money, technical mentoring and operational support. The U.S. Department of Energy and its research and development facility, Argonne National Laboratory provides competition management, team evaluation, technical and logistical support. Through this important partnership, EcoCAR aims to inspire and support the next generation of scientists and engineers to unite around the common goal of sustainable mobility.

Headline Sponsors

U.S. Department of Energy

General Motors Company

Diamond Sponsors

Government of Canada

Platinum Sponsors

U.S. Environmental Protection Agency

California Air Resources Board

A123 Systems, Inc.

dSPACE, Inc.

National Instruments

MathWorks

Freescale Semiconductor

AVL Powertrain Engineering, Inc.

Gold Sponsors

Clean Cities

National Science Foundation

Woodward

Vector CANtech, Inc.

Robert Bosch, LLC

Sensors, Inc.

Silver Sponsors

Snap-On Tools

Magna International/Magna Powertrain

Renewable Fuels Association

Bronze Sponsors

Protec Fuel

Siemens PLM Software

Electric Power Research Institute

Delphi Foundation

EcoMotors

Women in the Winner's Circle Foundation

igus

CarSim

XM Radio

OnStar


Participating Schools

Embry-Riddle Aeronautical University

Georgia Tech

Michigan Technological University

Mississippi State University

Missouri Univ. of Science and Technology

North Carolina State University

The Ohio State University

University of Ontario Institute of Technology

Pennsylvania State University

Rose-Hulman Institute of Technology

Texas Tech University

University of Victoria

University of Waterloo

University of Wisconsin

Virginia Tech

West Virginia University




Contacts:


Kimberly DeClark

Jennifer Eberline

ANL

Greenough Communications

202-441-0096

919-423-5156

Email Contact

Email Contact




1 | 2  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise