SculptCAD Rapid Artists to Debut at Society of Manufacturing Engineers Rapid 2010 Conference and Exposition

DALLAS, TX -- (MARKET WIRE) -- Apr 12, 2010 -- SculptCAD Rapid Artists, an experimental project launched by SculptCAD, a provider of sculptural/CAD design and reverse engineering services, announced its upcoming debut at the 2010 Society of Manufacturing Engineers (SME) RAPID Conference and Exposition (SME RAPID 2010), to be held on May 18-20 at the Disneyland Hotel in Anaheim, California. For the first time ever, SME RAPID 2010 will host an exhibit dedicated to the convergence of art and technology. Titled "Art's Newest Medium: Rapid Prototyping Applied to Contemporary Visions of Sculpture," the exhibit will feature the works of 15 SculptCAD Rapid Artists members who are exploring the use SculptCAD digital 3D modeling software to create art.

"This inaugural exhibit marks the first time that the SME RAPID Conference and Exposition has been open to fine art," said Nancy Hairston, Founder and President of VanDuzen Inc. -- the parent company of SculptCAD, and a SculptCAD Rapid Artists sculptor. "I applaud the vision of the SME RAPID 2010 conference leaders in welcoming SculptCAD Rapid Artists and its ground-breaking approach to art in the 21st Century."

"SME is always on the lookout for cutting-edge, rapid manufacturing applications to enhance the value of our program," said Gary Mikola, SME show manager. "SculptCAD Rapid Artists is a perfect fit. We've received strong interest from registered attendees and participants, and as a result we're also offering technical sessions that support the visual Contemporary Art Gallery."

Launched in October 2009, SculptCAD Rapid Artists' mission is to expose career fine artists, previously unfamiliar with digital techniques, to 3D software, 3D scanners, and Rapid Prototype (RP) output. Members of SculptCAD Rapid Artists include sculptors, painters, and installation artists who work in materials ranging from marble to rubber to wood. Using computer technology to fuel the creative process, SculptCAD Rapid Artists is challenging conventional perceptions of art in the physical realm.

Digital sculptures created by SculptCAD Rapid Artists members benefit the Booker T. Washington High School for the Performing and Visual Arts (Arts Magnet) in Dallas. Many of the participating artists are alumni of Arts Magnet. All exemplify an innovative spirit consistent with the contemporary vision of the extraordinary Dallas Arts District.

At SME RAPID 2010, Nancy Hairston will give a Fine Arts track presentation titled, "Rapid Artists - Experiment in Artists Immersed in Rapid Technologies for the First Time." Scheduled on May 19 at 10:00 a.m., Nancy's presentation will report on the potential that SculptCAD Rapid Artists is unleashing.

About SculptCAD Rapid Artists
SculptCAD Rapid Artists is an experimental project launched by SculptCAD, a leading provider of sculptural/CAD design and reverse engineering services. Dedicated to the creation of fine art, SculptCAD Rapid Artists' mission is to explore and expand the use of computer technology to design and produce works of sculpture utilizing 3D software, 3D scanning, and 3D printing. Artists can create having freedom from the constraints of physical media, and can make art faster using digital tools. Digital also offers artists the ability to make multiple versions and editions of their work, print art on-demand, and enable collectors to purchase and download art online. SculptCAD Rapid Artists was founded in October 2009 and is based in Dallas, Texas. For more information about how SculptCAD Rapid Artists is changing perceptions of art in the physical world, visit http://www.sculptcadrapidartists.com.

About SculptCAD
SculptCAD specializes in time compression technologies for 3D design and manufacturing. These technologies include reverse engineering, 3D visualization, 3D modeling, rapid prototyping, rapid manufacturing, digital sculpting and CAD surfacing. SculptCAD serves a number of industries including fine art, housewares, medical, aerospace, packaging, product and toy manufacturing, and inspection. SculptCAD is a division of VanDuzen Inc., a rapid digital solutions company. Based in Dallas, Texas, VanDuzen is the parent company of two other divisions: MedCAD and Vouch Software.

About Nancy Hairston
President & CEO, VanDuzen Inc.
Ms. Hairston brings 17 years of experience as a traditional sculptor and digital technologist to the pursuit of integrating 3D technologies in the creation and manufacture of sculptural products. Receiving a BA in Sculpture from Loyola University in New Orleans, Ms. Hairston began a career in 3D modeling with Alias | Wavefront / Silicon Graphics , in 2000, Ms. Hairston joined SensAble Technologies, and was instrumental in designing and implementing the "rapid" digital product development process between the United States and Asia for major American manufacturers. She founded VanDuzen Inc. in 2002, whose divisions - SculptCAD and MedCAD - work with major manufacturers to develop a variety of products, from toys to housewares to medical devices using Rapid technologies. In 2009, VanDuzen Inc. developed Vouch Software, which detects safety hazards in children's products. VanDuzen Inc. is based in Dallas, Texas.

About The Society of Manufacturing Engineers (SME)
Founded in 1932, the Society of Manufacturing Engineers ( www.sme.org) is the premier source for manufacturing knowledge, education and networking. Through its many programs, events and activities, SME connects manufacturing practitioners to each other, to the latest technology and the most up-to-date processes spanning all manufacturing industries and disciplines, plus the key areas of aerospace and defense, medical device, motor vehicles, including motorsports, oil and gas and alternative energy. A 501(c)3 organization, SME has members around the world and is supported by a network of technical communities and chapters worldwide.

Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=1220155

Add to Digg Bookmark with del.icio.us Add to Newsvine

Media Inquiries
Nancy Hairston
President & CEO, VanDuzen Inc.
(214) 324-0030

Email Contact 





Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise