Sinomatech Selects VISTAGY’s FiberSIM® Software to Increase Speed of Wind Blade Design and Production

Sinomatech Selects VISTAGY’s FiberSIM® Software to Increase Speed of Wind Blade Design and Production

Premier Chinese wind firm will use FiberSIM® to enhance quality and repeatability of composite wind blades so it can meet goal of producing 500 sets annually

WALTHAM, MA, (USA), April 6, 2010 — VISTAGY, Inc., a leading provider of industry-specific engineering software and services, today announced that Sinomatech Wind Power Blade Co., LTD, a division of Sinoma Science & Technology, one of China’s largest companies, has purchased FiberSIM® composites engineering software to help streamline its design-to-manufacturing process so it can meet its goal of producing 500 sets of wind blades annually and continue to keep pace with rapidly growing market demand.

Given this lofty goal, the Sinomatech design team was faced with multiple challenges, including increasing the speed of blade design and production and improving the quality and repeatability of manufactured blades. In order to respond to these challenges, the firm’s design department determined it needed best-of-breed engineering tools that would enable them to enhance their capabilities for engineering composite blades.

The design department selected FiberSIM because it meets a number of important criteria, including enabling:
• Faster design cycles, enabling more trade off studies for improved blade configuration and reduced weight
• More accurate and detailed composite part and assembly definition
• Support for rapid iterations between design and analysis for earlier and better blade optimization
• Enhanced composites producibility simulation for early detection of manufacturing issues and rapid feedback to design
• Seamless linking from design to production with support for automated cutting, laser positioning, and electronic documentation.

“We’ve undertaken an ambitious program called ‘500 sets of wind power blades annually construction project’” said Li Junxiang, manager of the Design and Research Department at Sinomatech. “To reach that goal, we need composites engineering software that will enable us to take our process to the next level.

“FiberSIM is well suited for that task because it provides a digital thread that runs from design-to-manufacturing, enabling us to connect all the disciplines so we can move more accurately and quickly through the entire process. That also enhances our ability to establish a repeatable manufacturing process.”

“We’re pleased to have the opportunity to work with one of the premier wind turbine blade manufacturers in China to help them meet their goals,” said Olivier Guillermin, VISTAGY’s director of product and market strategy. “With the extraordinary expansion taking place in wind, suppliers recognize the need to get to market as soon as possible, and Sinomatech’s commitment validates the idea that FiberSIM helps composite wind turbine manufacturers do just that.”

About Sinomatech Wind Power Blade Co., LTD Sinomatech Wind Power Blade Co. Ltd was established by Sinoma Science & Technology Co. Ltd. The company has 50 years of experience in composite/FRP product research and development, starting as Beijing FRP Research & Design Institute. The company is engaged in research, design, manufacture, sales and technical service for wind turbine blades and moulds. The company is located in the Badaling economic development area and is engaged in blade design, testing and material research. The current capacity is 12 sets of blade moulds and 300 sets of 1.5MW turbine blades annually. The company’s leading product is Sinoma 40.2, which is used by many well known wind turbine manufactures both in China and abroad.

VISTAGY, Inc. is a leading global provider of engineering software that enhances the functionality of commercial 3D CAD systems. For almost 20 years, VISTAGY has developed, sold and supported solutions that enable engineers to capture complete virtual product definitions, facilitating automatic reuse of engineering information and efficient communication across the enterprise and supply chain. VISTAGY software increases productivity, improves communication throughout the product lifecycle, and enables better-informed decision-making earlier in the design process. Our customers include over 200 of the world’s leading manufacturers in the aerospace, automotive, transportation interiors and wind energy industries. VISTAGY is headquartered in Waltham, Massachusetts, USA and can be reached at +1.781.250.6800 or by visiting

“VISTAGY. Engineer success.”™

VISTAGY, the VISTAGY logo, FiberSIM, and Engineer Success are registered trademarks or trademarks of VISTAGY, Inc., in the United States and in other countries. All other companies and products referenced herein have trademarks or registered trademarks of their respective holders.


Read the complete story ...

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise