Denali Software and Carbon Team for Transaction-Level Model Distribution

Collaboration Springs High-Quality DDR-SDRAM C-Based Models for Enhanced System-Level Simulation and Performance Analysis

SUNNYVALE, Calif., March 24 — (PRNewswire) — Denali Software, Inc., a leading provider of intellectual property (IP) and electronic design automation (EDA) software, and Carbon Design Systems today announced a collaboration to provide designers with cycle-accurate models of Denali's configurable Databahn™ DDR SDRAM controller IP for virtual platforms. Databahn IP models are available today for use with leading system simulation environments (including Carbon SoC Designer, CoWare Platform Architect, and OSCI SystemC) to perform architectural analysis, validate system performance, and perform hardware/software integration prior to silicon.

"We are extremely pleased to have Denali join our growing IP community," stated Bill Neifert, vice president of Business Development at Carbon. "Our customers are using Denali's high-performance Databahn DDR-SDRAM IP to architect some of the world's most complex system on chip (SoC) designs. Adding Databahn DDR memory interface models to our IP offerings gives our mutual customers the ability to leverage the advanced capabilities of the platform across more of their designs."

DDR SDRAM plays a critical role in overall system performance in a variety of applications including consumer, communications, and computing. This collaboration delivers 100% cycle-accurate models of this vital IP to the engineers who need it most: architects making critical performance tradeoffs and firmware developers debugging presilicon software. Cycle-accurate models are available immediately from Carbon Design Systems for all SDRAM memory interface IP in the Databahn portfolio, including support for the latest DDR3, DDR2, and LPDDR2 specifications.

"Denali is committed to expanding the ecosystem around our broad range of high-quality controller IP to ease our customers' design process," said Marc Greenberg, director, Technical Marketing at Denali Software. "Partnering with Carbon to make models of our DDR SDRAM controller cores available in SoC Designer and other virtual environments gives our customers access to a valuable platform to perform architectural exploration, optimize system performance, and debug complex firmware issues earlier and more accurately than previously possible."

About Databahn DDR and PHY Solution

Denali's Databahn DDR-SDRAM controller and synthesizable PHY IP is a complete solution ready to be integrated into SoCs and ASICs which interface with DDR memories. Each controller and PHY is delivered to match the unique requirements of the customer's DDR application. These are configurable for data width, ECC, low power, and many other options, and supports DDR1/2/3 and LP-DDR1/2 devices. For more information about Databahn DDR-SDRAM and PHY solution, visit: http://www.denali.com/products/dram.

About Denali Software

Denali Software, Inc., is a leading provider of intellectual property (IP) and electronic design automation (EDA) software and for system-on-chip (SoC) design and verification. Denali delivers the industry's most trusted solutions for deploying PCI Express, USB, NAND Flash, and DDR SDRAM subsystems. Developers use Denali's EDA, IP, and services to reduce risk and speed time-to-market for electronic system and chip design. Denali is headquartered in Sunnyvale, California and has offices around the world to serve the global electronics industry. More information about Denali, its products and services is available at www.denali.com.

About Carbon Design Systems

Carbon Design Systems offers the leading system validation solution for complex system-on-chip (SoC) designs. Carbon provides 100% implementation accuracy on the critical components required for accurate architectural analysis and pre-silicon hardware/software validation. Carbon's customers are systems, semiconductor, and IP companies that focus on wireless, networking, and consumer electronics. Carbon is headquartered at 125 Nagog Park, Acton, Mass., 01720. Telephone:  (978) 264-7300. Facsimile:  (978) 264-9990. Email:   Email Contact. Website:   www.carbondesignsystems.com.

Denali and Denali Software are registered trademarks of Denali Software, Inc. Databahn is a trademark of Denali Software, Inc. All other trademarks are of their respective owners.

Editorial contact:


Pierre Golde

Denali Software, Inc.

(408) 743-4262

Email Contact



SOURCE Denali Software, Inc.

Contact:
Denali Software, Inc.
Carbon Design Systems
Pierre Golde of Denali Software, Inc.
Phone: +1-408-743-4262
Email Contact
Web: http://www.denali.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise