Tanner EDA and Dongbu HiTek Semiconductor Jointly Develop Foundry-certified Process Design Kits (PDKs) for Critical Process Nodes

Leaders in A/MS design innovation to deliver certified libraries, integrated flow

MONROVIA, California and SEOUL, Korea – March 24, 2010 Tanner EDA, the catalyst for innovation for the design, layout and verification of analog and mixed-signal (A/MS) integrated circuits (ICs) and Dongbu HiTek, a world-class wafer fabricator, are jointly developing foundry-certified process development kits (PDKs) that will be integrated seamlessly into Tanner’s cohesive, integrated tool flow. Designers using Tanner software solutions will have certified libraries to draw on as they create ICs at critical process nodes for production at Dongbu foundries, reducing design risk and providing faster time to market and higher quality of outcomes.

Dongbu HiTek has distinguished itself as a global A/MS technology leader since launching the world’s first foundry BCDMOS process at the 0.18 micron node in June 2008. Tanner EDA is focused on providing innovative solutions to designers of breakthrough A/MS ICs. Driven by customer demand, jointly developed and maintained foundry-certified PDKs will deliver access to Dongbu HiTek’s 0.35 micron BCDMOS process on Tanner’s tool flow. This BCDMOS process is ideal for integrating analog circuits (using Bipolar), logic circuits (using CMOS) and high-voltage circuits (using DMOS) all on the same chip.

 “Our aim is to be the most respected analog foundry in the business,” said Taek Soo Kim, Ph.D, vice president of Dongbu’s HiTek’s technical engineering division. “This collaboration with Tanner, which has provided complete A/MS design solutions for so many leading-edge products, demonstrates our continuing commitment to provide Dongbu customers with the best choices in electronic design automation software.”

‘This joint PDK is ideal for designers creating solutions in consumer electronics, mobile handsets and automotive applications,” said John Zuk, vice president of marketing and strategy for Tanner EDA. “At 0.35 microns, Dongbu HiTek’s analog process has proven effective in reducing both manufacturing cost and time to market. Collaborating with a foundry as well respected as Dongbu HiTek will enable us to continue delivering on our commitments of interoperability, productivity, and quicker design cycles for our customers.”

Availability of Foundry-certified PDKs

Joint development is ongoing. Tanner EDA and Dongbu HiTek anticipate the first set of foundry-certified PDKs in Q3, 2010, with additional PDKs available later in the year.

About Tanner EDA

Tanner EDA provides of a complete line of software solutions that catalyze innovation for the design, layout and verification of analog and mixed-signal (A/MS) integrated circuits (ICs). Customers are creating breakthrough applications in areas such as power management, displays and imaging, automotive, consumer electronics, life sciences, and RF devices. A low learning curve, high interoperability, and a powerful user interface improve design team productivity and enable a low total cost of ownership (TCO). Capability and performance are matched by low support requirements and high support capability as well as an ecosystem of partners that bring advanced capabilities to A/MS designs.

Founded in 1988, Tanner EDA solutions deliver just the right mixture of features, functionality and usability. The company has shipped over 33,000 licenses of its software to more than 5,000 customers in 67 countries.

 

 

HiPer Verify and HiPer Silicon are trademarks of Tanner Research, Inc.
All other trademarks and trade names are the property of their respective owners.

 

# # #

Contacts:

For Tanner EDA :
John Zuk, Tanner EDA – (626) 471-9765, Email Contact
Linda Marchant, Cayenne Communication LLC – (919) 451-0776, Email Contact

Email Contact




Review Article Be the first to review this article

Autodesk University 2017

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
PTC Marches On With New Vuforia AR Platform Release
Jobs
Architectural Designer for Champion Home Builders at Troy, MI
GIS Analyst for G2 Partners LLC at San Ramon, CA
GIS Software Developer for UDC at Englewood, CO
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise