ITI TranscenData Releases CADIQ Version 6.1

The latest version of the world’s leading 3D CAD model validation software is now available


Milford, OH, November 30, 2009 – ITI TranscenData announced today the release of CADIQ 6.1, the latest
edition of its leading CAD model validation application that identifies model-based design issues that adversely
impact downstream processes, such as tooling, simulation and manufacturing.


Engineers tasked with long-term data retention and archival initiatives use CADIQ to certify translations and
conversions for 3D CAD models prior to archival, through geometry and semantics-based validation. CADIQ validates
3D models, assemblies, corresponding features and product manufacturing information (i.e. 3D PMI, GD&T, FT&A)
against the source data, and provides automated predictive diagnostics. These diagnostics are used to identify,
forecast and troubleshoot legacy conversion issues.


CADIQ is packaged for use in desktop or server environments, is easily integrated into design release and check-in
and check-out processes of PLM workflows, and can be embedded in interoperability automations solutions.
The release of CADIQ 6.1 offers many new developments, such as:


Direct Assembly Model Comparison
No flattening required for CATIA V5, NX, Pro/ENGINEER, SolidWorks, Parasolid and STEP component
placement and properties comparison


Part Comparison Diagnostics
Feature parameter diagnostic for model revisions in the same CAD system


3D PMI Comparison Diagnostics
STEP “PMI as Polyline” only for model revisions in the same CAD system

CATIA V4 CAD File Interface
For indirect V4 model analysis, No CATIA V4 installation/license prerequisite on Windows and UNIX platforms
• STEP Validation Property Quality Diagnostics

Improved Batch Analysis and Statistics


"The latest enhancements in CADIQ 6.1 set it apart from all other CAD validation tools on the market," said Doug
Cheney, CADIQ Product Manager. “Most tools only verify design reuse for design – enforcing modeling
conventions. CADIQ goes a step further, validating MBD models for downstream reuse – at design release and
through any format conversion in the lifecycle. When quality issues are identified, CADIQ can document engineering
change revisions in a 3D PDF file for easy communication, collaboration, and markup.”


The new product release is available immediately worldwide and current CADIQ customers can easily upgrade
to version 6.1.


About ITI and ITI TranscenData

International TechneGroup Incorporated (ITI) was founded in 1983 and is headquartered in Milford, OH. ITI TranscenData is the product data interoperability business within ITI. CAD/CAM/CAE/PLM vendors and end users alike utilize ITI
TranscenData's products and services for seamless data exchange between dissimilar systems. Customers include ABB,
Airbus, BAE Systems, Boeing, Dassault, EADS, Ford, Honeywell, Lego, Lockheed Martin, NASA, MAHLE Powertrain, Pratt
& Whitney, Raytheon, Renault, Rockwell Collins, Rolls Royce, Samsung Electronics, Siemens, Snecma, Spirit AeroSystems,
Thales, ThyssenKrupp, US Air Force, US Army, Xerox and others.


For more information about ITI TranscenData’s products and services, visit www.transcendata.com
email: Email Contact, or call 1-888-783-9199 x3858

Contact: Margo Mohler
ITI TranscenData
Phone: (513) 576-3858
Email Contact
5303 DuPont Circle
Milford, OH 45150
www.transcendata.com

CADIQ is a registered trademark of International TechneGroup Incorporated
TranscenData is a trademark of International TechneGroup Incorporated




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise