SolidWorks Customer BUB Racing Recaptures Motorcycle World Land Speed Record

367.382 mph in a Two-Wheeled Missile

CONCORD, Mass. — (BUSINESS WIRE) — November 30, 2009 — Dassault Systèmes SolidWorks Corp. ( DS SolidWorks) customer Denis Manning and his BUB Enterprises racing team have set the motorcycle world land speed record, recapturing a title Manning has now held three times since 1970.

The missile-shaped motorcycle, designed in SolidWorks® CAD software and optimized in SolidWorks Simulation software, broke the previous record by a margin of more than 8 mph. Piloted by Chris Carr, the BUB Racing Streamliner officially clocked in at 367.382 mph on Thursday, Sept. 24, 2009 over a measured mile at the hallowed Bonneville Salt Flats in Utah (see video: http://is.gd/3Qw8d).

“The last thing we did before the run was make an eighth-inch change to the aerodynamics, and that made all the difference,” said Manning, CEO of BUB Enterprises. “The data was telling us the nose was trying to dive, so we raised it up and it worked. Our new alcohol-fueled V4 engine put the record within reach.”

Manning set his first motorcycle land speed record in 1970, and his team has since traded the record with opponents. As his Streamliner designs grew increasingly sophisticated, the BUB team realized it needed to use advanced mechanical design, simulation, and manufacturing technologies to stay ahead of its competitors.

“Until recently, going really fast basically required money,” Manning explains. “Breaking the record used to be pretty much, ‘Gentlemen, start your checkbook.’ Now it’s, ‘Gentlemen, start your gray matter.’ The designs that have a legitimate shot at speeds over 350 mph require a whole new level of engineering know-how and technology like SolidWorks helps deliver. CAD is our virtual prototyper, and Simulation is our crystal ball.”

BUB selected SolidWorks because it helps the team easily transform ideas into reality and successfully confront its steepest technical challenges. “SolidWorks software helped lower the bar for us to accomplish this record,” said Manning. “Because of the design and simulation tools, we no longer had to build and smash the bike a few times, or blow an engine, before we were ready for a record attempt. We knew the numbers, we knew how to do this, and we set the record again.”

BUB also uses SolidWorks, including its Flow Simulation software, to design and analyze its BUB commercial exhaust systems. BUB Enterprises relies on authorized SolidWorks reseller GoEngineer for ongoing software training, implementation, and support.

About Dassault Systèmes SolidWorks Corp.

Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. subsidiary, is a world leader in 3D solutions. The company develops and markets software for design, analysis, product data management, documentation, and environmental impact assessment. It is the leading supplier of 3D CAD technology, giving teams intuitive, high-performing software that helps them design better products. For the latest news, information, or an online demonstration, visit the company’s Web site ( www.solidworks.com) or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).

CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks, and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other brand and product names are trademarks of their respective owners. Copyright © 2009 Dassault Systèmes SolidWorks Corp.



Contact:

Dassault Systèmes SolidWorks Corp.
Nancy Buchino, 978-318-5262
Email Contact
www.solidworks.com
or
Beaupre & Co. Public Relations
Darby Johnson, 603-559-5809
Email Contact
www.beaupre.com




Review Article Be the first to review this article
Rand3D

SolidCAM: Cutting Webinar

Featured Video
Jobs
Mechanical Engineer I for Air Techniques, Inc at Melville, NY
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
The Rise of Mechatronics at Dassault Systèmes San Diego 5005 Wateridge Vista Drive San Diego CA - Sep 12, 2017
The Rise of Mechatronics at Buca di Beppo - Pasadena 80 West Green Street Pasadena CA - Sep 13, 2017
The Rise of Mechatronics at Dassault Systèmes Santa Clara 3979 Freedom Circle, Ste 750 Santa Clara CA - Sep 14, 2017
The 30th Annual Integrated Process Excellence Symposium & Training at Wyndham Grand Bonnet Creek Resort Orlando FL - Sep 18 - 20, 2017
Kenesto: 30 day trial



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise