IBM and Dassault Systemes Help Panasonic Home Appliances Company Develop Smarter Cooking Appliances

New Products Focus on Convenient Lifestyles While Delivering Added Safety Features

PARIS & ARMONK, N.Y. — (BUSINESS WIRE) — November 17, 2009Dassault Systèmes (DS) (Paris: DSY) (Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM) solutions, and IBM (NYSE: IBM) today announced that they have teamed up with Panasonic's Home Appliances Company and its Kitchen Appliance Business Unit (BU) to support the development of more convenient and safer home appliances and accelerate the introduction of induced heating (IH) appliances, such as flat cooktops, into the Japanese market.

IH appliances are produced and developed by Panasonic's Kitchen Appliance BU and they are gaining popularity as an alternative to gas-heated appliances. These appliances generate heat through a process known as Joule heating or the transfer of heat to the bottom of a cooking pan through an electromagnetic field. Heating efficiency levels are over 90% since heat is transmitted directly to the cooking area safely without any air pollution as this method avoids cooking food using direct fire.

With its industry’s first all-metal heating and light-sensor technologies, Panasonic’s IH appliance leads the industry in heat induction technology allowing consumers to quickly measure cooking temperatures so they can accurately control the amount of heat generated for cooking.

As demand increases for products that perform intelligent functions, companies face the challenge of managing complex design environments to interconnect the software, mechanical and electrical components required to manufacture more sophisticated products. IBM and Dassault Systèmes are helping Panasonic’s Kitchen Appliance BU use CATIA software, a 3D virtual design platform, for the digital development of product design plans used in the manufacturing of more energy-efficient, electrical appliances with features that will help consumers lead smarter lives.

Panasonic's Kitchen Appliance BU uses PLM software solution CATIA to help shorten the product development period and improve design quality as follows:

  • All design processes, from initial digital designs to physical mold designs, were done as part of one integral process to shorten the product development cycle.
  • Key IH appliance parts, such as resin and plate parts, were designed in a 3D format allowing fast and direct collaboration with multiple factory mold makers. The process of mold drawing and production was shortened by 40%.
  • Metal parts, critical to the operation of IH appliances, were designed and tested quickly, saving up to two days of testing time by using module of CATIA Sheet Metal Design.
  • With CATIA Analysis features, product designers performed repeated analysis of large and complex assembly parts quickly, which allowed the Kitchen Appliance BU team to focus on delivering a high quality product early in the design process.

Industry analysts point to demand for future products such as zoneless induction stoves that can be powered with intelligent sensors that determine the presence of pots anywhere on the stove and automatically ignite energy under the cooking pot and nowhere else. Panasonic's Kitchen Appliance BU will continue using Dassault Systèmes PLM solution for the design and development of new eco-friendly products that help reduce of carbon monoxide (CO2) emissions.

"Compared to other software design products, CATIA has a rich set of design functions needed for products requiring sophisticated surface and shape designs such as our electric cooking heaters," said Mr. Yasushi Morimoto, team leader, Kitchen Appliance BU, Home Appliances Company, Panasonic Corporation. "Seamless integration between CAD, CAE (Computer Aided Engineering) and CAM (Computer Aided Manufacturing) drove our decision to choose Dassault Systèmes 3D platform. Our goal is to expand into new product development areas by enhancing collaboration among internal units, realizing global collaborative design, and improving perfection of design through expanding utilization of CAE," added Mr. Morimoto.

"Japanese companies have long mastered the art of achieving excellence in product design and manufacturing and with Dassault Systèmes CATIA 3D software, Panasonic's home appliance division can now deliver a smarter and greener product," said Albert Bunshaft, vice president, IBM Product Lifecycle Management.

For more information about IBM please visit and

For Dassault Systèmes please visit

About Dassault Systèmes

As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 115,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product - SolidWorks for 3D mechanical design - DELMIA for virtual production - SIMULIA for virtual testing - ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. Dassault Systèmes’ shares are listed on Euronext Paris (#13065, DSY.PA) and Dassault Systèmes’ ADRs may be traded on the US Over-The-Counter (OTC) market (DASTY). For more information, visit .

1 | 2  Next Page »

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Colortrac: LearnMore
TurboCAD pro : Free Trial

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise