Game, Set, Match: ANSYS Software Verifies Design of Wimbledon Innovative Retractable Roof

Engineering Software from ANSYS Used to Simulate Opening and Closing Mechanisms

SOUTHPOINTE, Pa. — (BUSINESS WIRE) — October 27, 2009 — ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced that its software was used to verify parts of the design of the new retractable roof over Centre Court at Wimbledon, one of the most famous tennis venues in the world. The U.K.-based engineering firm Advanced Computational Analysis (ACA) used software from ANSYS to conduct both static and dynamic analyses of the roof to ensure that it would perform properly under real-world loads and stresses. The roof operated as designed at its debut at the Championships tennis event, held this summer at London’s All England Lawn Tennis and Croquet Club.

Five years in development, the 17,000-square foot retractable roof is an electromechanically operated structure that includes 10 movable steel trusses that support a translucent, weather-resistant fabric canopy. When open, the roof sections are “parked” at opposite sides of the court. To close the roof, the coordinated electromechanical system moves the trusses apart and, at the same time, unfolds and stretches out the fabric between the trusses, until the two sections meet in an overlapping seam above the middle of the structure.

While U.K. construction company Galliford Try was responsible for the overall build of the 3,000-tonne roof, the ambitious project involved many expert subcontractors. ACA was charged with performing static and dynamic verification of the mechanisms that open and close the trusses. Dr. Martyn Lacey, founder of ACA, explained, “Capita Symonds (principal structural engineering consultants) and Street Crane Express (motive control and automation specialists) had constructed three roof trusses for physical testing, but obviously it would be extremely time- and cost-intensive to build a prototype of the entire roof. So to perform a virtual analysis that would provide accurate, predictive results, we turned to software from ANSYS, which ACA has used for many years as its technology of choice. Our verification process was designed to ensure that the mechanisms on each truss would perform as expected.”

ACA used software from ANSYS to conduct both static and dynamic 3-D analyses of the roof trusses in a virtual environment, confirming that they could withstand real-world physical loads and mechanical stresses in both moving and at-rest positions. ACA focused special attention on the electromechanical actuators between each pair of trusses that are responsible for moving the roof. These actuators are subject to obvious physical forces, such as the weight of the trusses, as well as more subtle forces such as the changing tension of the fabric canopy. ANSYS® software supported the full range of simulation and analyses needed to verify the design of the roof system. “By using ANSYS software, we performed a timely, cost-effective verification of the roof’s design so the designers could proceed with construction,” said Dr. Lacey.

The new retractable roof made its Championships debut in late June, when rain would have otherwise interrupted a match. As the two roof sections came together, the capacity crowd rose in a standing ovation. Throughout the 2009 tournament, the roof was widely featured in worldwide coverage of the Championships.

“The Wimbledon retractable roof attracted international attention this summer, and so it was imperative that it work as intended,” said Dipankar Choudhury, vice president of corporate product strategy and planning at ANSYS, Inc. “While Wimbledon is steeped in tradition, the roof signals a new era of innovation. Unique ideas like this can take engineering in new directions, where ‘experience’ and prototype testing can’t foresee or solve every problem — and they’re extremely cost prohibitive. Virtual analysis with software from ANSYS played a groundbreaking role in this project, before construction even began.”

Ian Ritchie, chief executive of the All England Club, said, “We set out to make Wimbledon the world’s premier tennis event — the tournament the players most want to win, the tournament spectators most want to come to and the tournament everyone wants to watch. The new Centre Court roof project has been a sophisticated engineering feat that adds to the prestige of this event.”

For downloadable images, visit

About ACA (Advanced Computational Analysis)

Founded in 1988, ACA Engineering Consultants is a Nottingham, U.K.-based engineering consultancy. The firm provides mechanical stress analysis and structural stress analysis on all types of structures, as well as mechanical systems analysis, thermal analysis, thermal stress analysis, vibration analysis, seismic analysis and physical testing. For clients in a wide range of industries, the firm is able to reduce development costs and schedules by using engineering simulation tools to review and verify designs.

About ANSYS, Inc.

ANSYS, Inc., founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation. The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 60 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ over 1,600 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit for more information.

1 | 2  Next Page »

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise