Mentor Graphics Catapult C Synthesis Selected by Fujitsu Microelectronics Solutions Limited for Design and Consulting Services

WILSONVILLE, Ore. — (BUSINESS WIRE) — September 2, 2009 — Mentor Graphics Corp. (NASDAQ: MENT) today announced that Fujitsu Microelectronics Solutions Limited has chosen the Catapult® C Synthesis tool for use in its design and prototyping services organization.

To tackle the challenges of increasing size and complexity of advanced IC designs, it is becoming ever more important to improve design efficiency with high-level synthesis. At the same time, there is a learning curve associated with deploying a new methodology such as high-level synthesis. Based on a depth of knowledge and experience in the high-level synthesis field, Fujitsu Microelectronics Solutions Limited will provide a range of consulting services to address customers’ unique needs and facilitate the process of introducing high-level synthesis to improve design efficiency. Fujitsu Microelectronics Solutions Limited's consulting services include high-level synthesis methodology, implementation, prototyping and hands-on training.

“By providing highly-flexible services to match each customer's requirement, we can help them apply high-level synthesis tools and achieve a dramatic reduction in design cycle time,” said Mr. Takao Sukemura, General Manager, Development DIV. I of Fujitsu Microelectronics Solutions Limited. “In addition to the front-end design that starts with high-level synthesis, we also have a rich experience in back-end processes, so we can cover the entire workflow of ASIC/SoC development.”

“We are impressed with Fujitsu Microelectronics Solutions Limited’s deep knowledge and experience in IC design and ESL methodologies, especially in regard to C Synthesis, and we believe their services will be beneficial for a wide range of mutual customers,” said Simon Bloch, Vice President and General Manager of Mentor Graphics Design and Synthesis Division. “As companies deploy high-level synthesis, we are seeing a significant amount of Catapult C adoption given its ability to synthesize both algorithmic and control blocks, balance excellent results across power/area/performance and provide clear benefits around an integrated verification methodology. Fujitsu Microelectronics Solutions Limited's decision to use Catapult C Synthesis as their high-level synthesis tool of choice further reinforces our technical leadership.”

About Catapult

The Catapult C Synthesis tool is the first product to automatically generate control and algorithmic RTL multi-block designs from a pure ANSI C++ source where both the core algorithm and interface are untimed. This productivity improvement gives designers time and freedom to automatically perform detailed design exploration of different micro-architectural options and interface scenarios to quickly achieve fully optimized hardware designs. For more information, including whitepapers, datasheets and product demos on the Catapult C Synthesis tool, please visit http://www.mentor.com/esl.

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of about $800 million and employs approximately 4,425 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics and Catapult are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)



Contact:

Mentor Graphics
Carole Dunn, 503-685-4716
Email Contact
or
Ry Schwark, 503-685-1660
Email Contact




Review Article Be the first to review this article

SolidCAM: SolidCARE

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
GIS Analyst for G2 Partners LLC at San Ramon, CA
Structural Engineer for Albert Kahn and Associates at Detroit, MI
GIS Software Developer for UDC at Englewood, CO
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise